HACKER SAFE certified sites prevent over 99.9% of hacker crime.
Click for company profile




(Your shopping cart is empty)

  Home > Valves > Rain Bird Valves > Rain Bird GB-Series Valves >

  100-GB - RainBird 1 inch Threaded Inlet/Outlet GB Series Valve
  100-GB - RainBird 1 inch Threaded Inlet/Outlet GB Series Valve
 


List Price: $160.00
Our Price: $115.20
You Save $44.80!

Part: 6"x4"x7"


Product Code: 100-GB
Qty:


Description
 


RAIN BIRD GB SERIES VALVES:

Rain Bird GB Series Valves are durable brass performance valves for commercial applications. The GB Series embodies classic hardware and classic performance.

 

RAIN BIRD GB VALVE MODELS:

RAIN BIRD SOLENOIDS:

 

 

100-GB - RainBird 1 inch Threaded Inlet/Outlet GB Series Valve

RAIN BIRD 100-GB

1" FPT Inlet
1" FPT Outlet

Non-Potable Handle in Purple is not included. Standard black handle is included.

Tech Spec (1.01 MB)




  • Red brass construction for longer life and more rugged performance.
  • Reverse flow feature ensures valves fail in the closed position if the diaphragm tears or rips. Prevents flooding, water waste and landscape damage.
  • Slow closing to prevent water hammer and subsequent system damage.
  • One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service.
  • Manual internal and external bleed. Internal bleed manually operates the valve without allowing water into the valve box; allows pressure regulator to be adjusted without turning the valve on at the controller first.
  • External bleed permits flushing debris from the system, recommended for system start up and repairs.
  • Flow control handle adjusts water flow as needed.
  • Accommodates optional, field installed PRS-D pressure regulating module to ensure maximum sprinkler performance.
  • Accepts latching solenoid for use with Rain Bird battery operated controllers.
  • Optional purple flow control handle for non-potable water applications (EFB-GB-NP-HAN).

  • Pressure: 15 to 200 psi (1,0 to 13,8 bar)
  • Flow: 5 to 200 GPM (1 to 45 m3/h; 0,32 to 12,60 l/s)
  • Temperature: Up to 150° F (66° C)
  • 24 VAC 50/60 Hz (cycles per second) solenoid power requirement:
  • 0.41 A (9.9 8VA) inrush current; 0.28 A (6.7 VA) holding current
  • Solenoid coil resistance: 24 Ohms, nominal
  1. Rain Bird recommends flow rates in the supply line not to exceed 7.5 ft./sec. (2,3 m/s) in order to reduce the effects of water hammer.
  2. For flows below 5 GPM (1,14 m3/h; 0,32 l/s), Rain Bird recommends use of upstream filtration to prevent debris from collecting below the diaphragm.
  3. For flows below 10 GPM (2,27 m3/h; 0,63 l/s) Rain Bird recommends the flow control stem be turned down two full turns from the fully open position.

  • 100-GB 6" (15,2 cm) x 4 1/2" (11,4 cm) x 2 1/4" (5,7 cm)
  • 125-GB 5 3/4" (14,6 cm) x 5" (12,7 cm) x 3" (7,6 cm)
  • 150-GB 6 1/2" (16,5 cm) x 5 1/2" (14 cm) x 4" (10,2 cm)
  • 200-GB 7" (17,8 cm) x 6 3/4" (17,1 cm) x 5 1/4" (13,3 cm)

 

 

Related Products...
RainBird GB Series Valves RainBird GB Series Valves
Our Price: $215.25
Add
Our Price: $171.75
Add
200-GB - RainBird 2 inch Threaded Inlet/Outlet GB Series Valve 150-GB - RainBird 1.5 inch Threaded Inlet/Outlet GB Series Valve


 Share your knowledge of this product with other customers... Be the first to write a review.



Browse for more products in the same category as this item:

Valves > Rain Bird Valves > Rain Bird GB-Series Valves
Manufacturers > Rain Bird