Rain Bird XCZ100PRF 1 in. Flow Control Zone Kit with Static Wye Filter
Shorter kits with only two components (valve plus pressure-regulating filter) mean that you can fit more Control Zone Kits in a valve box, saving time and money.
These PR Filter kits provide on/off control, filtration, and pressure regulation with only two parts; so there is less chance of leakage at the connections, both at installation and over the life of the system.
Features & Benefits
- Kits contain Low Flow Valve or 3/4" Anti-siphon valve
- RBY Filter and 30 psi pressure regulator
- Low Flow Valve is ideal for flows down to 0.2 GPM and allows you to install the filter downstream of the valve at these low flow rates
- Anti-siphon valve combines a reliable DV Valve and an atmospheric backflow preventer in one unit
- Simple; 3-component kit is easily installed and maintained
- Ideal for residential and small commercial applications
- Flow: 3.0 to 15.0 GPM (11.4 to 56.8 l/m)
- Inlet Pressure: 20 to 150 psi (1.4 to 10.3 bar)
- Regulated Pressure: 40 psi (2.8 bar)
- Filtration: 200 mesh (75 micron)
Note: An in-line check valve is required if the kit is not at the highest point in the irrigation system.
Pressure Loss Chart
In order to supply 40 psi (2.8 bars) outlet pressure, additional pressure is needed at the inlet since there is some pressure loss from water flowing through the kit. The amount of pressure loss depends on the flowrate.
The charts below list the minimum inlet pressure required to supply 40 psi (2.8 bars) of outlet pressure.
Manuals and Literature