Trust Guard Security Scanned
hours left for
same day shipping
hours left for
same day shipping

⚠️ Shipping Times May Vary Based on Inclement Weather Conditions

Loading...

Rain Bird Xeri-Pop Micro Spray Head 4 in. | XP-400X

SKU
XP-400X

Note: Some States Require Pressure Regulating Sprays (PRS) All spray sprinkler bodies sold in the following states will require pressure regulating stems (PRS) and EPA WaterSense certification on and after the dates listed below: Vermont: July 1, 2020 California: October 1, 2020 Colorado: January 1, 2021 Hawaii: January 1, 2021 Washington: January 1, 2021 Massachusetts: January 1, 2022 Washington, D.C.: March 15, 2022

RAIN BIRD XERI-POP MICRO-SPRAY:

The Xeri-Pop micro-spray makes it easy to integrate a durable micro-spray into a low-volume drip irrigation design. The only pop-up spray that works in low-volume low-pressure application, and this is the perfect solution to vandal-prone areas. Xeri-Pops can be installed and located in nearly any location and are ideal for small, odd-shaped planting beds; the 12" version is perfect for annual flower beds. Xeri-Pops work with Rain Bird 5' and 8' MPR nozzles and SQ Series Nozzles nozzles with square spray patterns and adjustable throws of 2.5' and 4'.

Unique Wiper Seal

Rain Bird's unique wiper seal makes reliable pop-up and pop-down possible between 20 and 50 psi. The precision-designed wiper seal combined with a molded cover and body, put Rain Bird Xeri-Pops in a class by themselves.

Unique wiper seal assures long-term pop-up and pop-down reliability, even at microspray flows and pressures.

Flush Retract
When a Multi-Port, 5B*, 5- or 8-Series MPR nozzle is installed on an XP Series pop-up, the unit pops up to water, then pops down flush once the system has been shut down. This eliminates unsightly black poly risers in the landscape. It also eliminates the maintenance hassles caused when conventional microsprays with small diameter threads snap off adapters, resulting in mini-geysers.
Micro-Spray Maintenance Problems Eliminated
The new XP Series Xeri-Pops solve both aesthetic and maintenance complaints quickly and easily without increasing installation time. They use Rain Bird Multi- Port, 5B**, 5- and 8-Series MPR nozzles. When the head pops down, the nozzle retracts flush to the cap. No more un-sightly polyethylene risers and no more maintenance complaints about micro-sprays that have snapped off and resulted in mini-geysers.
Specifications
  • Pressure: 20 to 50 psi (1.4 to 3.5 bar)
  • Filtration: Depends on nozzle used with Xeri-Pop
Features & Benefits
  • The Xeri-Pop can operate with 20 to 50 psi base pressure when water is supplied via 1/4" Distribution Tubing (XQ).
  • The flexibility of 1/4" tubing allows the Xeri-Pop to be easily located and relocated as planting conditions dictate.
  • A durable, plastic snap-collar (on 4" and 6" models) secures the 1/4" tubing to the outside of the Xeri-Pop case.
  • The Xeri-Pops 1/4" Distribution Tubing can readily connect to 1/2" or 3/4" polyethylene tubing or to a multi-outlet manifold (EMT-6XERI). Connections to polyethylene tubing are accomplished with either an SPB-025 1/4" Self-piercing barb Connector or an XBF1CONN 1/4" barb Connector.
  • External parts are UV-resistant and available in 4", 6" and 12" pop up heights.

Rain Bird Xeri-Pop Micro-Spray Models:

Rain Bird Compatible Nozzles:

More Information
Brand Rain Bird
Type Spray Head
Nozzle Connection Female Nozzles
Side Inlet No Side Inlet
Check Valve No SAM
Nozzle Installed No Nozzle (Flush Plug Only)
Application Residential
Warranty 3 Years
Pop-Up Height 4 in.