DV Series
1" Slip Inlet/Outlet Valve

Plastic Residential Irrigation Valves

Primary Applications:

Economical irrigation valve for residential and light commercial applications.

Features and Benefits:

• Double-filtered pilot-flow design for maximum reliability.
• Balanced-pressure diaphragm for long life.
• External bleed to manually flush system of dirt and debris during installation and system start-up.
• Internal bleed for spray-free manual operation.
• Energy-efficient, low-power encapsulated solenoid with captured plunger and 90-mesh (200 micron) solenoid filter.
• Buna-N diaphragm with self-cleaning 90 mesh (200 micron) pilot water filter and captive spring.
• Operates in low-flow and Xerigation® applications when the RBY filter is installed upstream.
• 1.25" (3,2 cm) stainless steel phillips head screws.
• Accepts latching solenoid for use with Rain Bird battery-operated controllers.
• Available as:
  • 3/4" (20/27) and 1" (26/34) standard in-line configuration
  • 1" (26/34) Slip-by-Slip (SS) configuration for low cost, solvent-weld installations
  • 1" (26/34) Angle (A) configurations for flexible installations especially when submains are deep
  • 1" (26/34) Male-by-Male (MM) thread configuration for quick and easy manifolding
  • 1" (26/34) Male-by-Barb (MB) and 1" Male-by-1.25" Barb male thread inlet by barb outlet configuration for installation with poly pipe.