RAIN BIRD DV/DVF SERIES VALVES:
Rain Bird DV/DVF Series Valves are economical irrigation valves for residential and light commercial applications with an available flow control option. Rain Bird DVF models include a unique, easy-to-turn patented pressure assisted flow control mechanism.

• Double-filtered pilot-flow design for maximum reliability.
• Balanced-pressure diaphragm for long life.
• External bleed to manually flush system of dirt and debris during installation and system start-up.
• Internal bleed for spray-free manual operation.
• Energy-efficient, low-power encapsulated solenoid with captured plunger and 90-mesh (200 micron) solenoid filter.
• Buna-N diaphragm with self-cleaning 90 mesh (200 micron) pilot water filter and captive spring.
• Operates in low-flow and Xerigation® applications when the RBY filter is installed upstream.
• 1.25" (3,2 cm) stainless steel phillips head screws.
• Accepts latching solenoid for use with Rain Bird battery-operated controllers.
• Available as:
  • 3/4" (20/27) and 1" (26/34) standard in-line configuration
  • 1" (26/34) Slip-by-Slip (SS) configuration for low cost, solvent-weld installations
  • 1" (26/34) Angle (A) configurations for flexible installations especially when submains are deep
  • 1" (26/34) Male-by-Male (MM) thread configuration for quick and easy manifolding
  • 1" (26/34) Male-by-Barb (MB) and 1" Male-by-1.25" Barb male thread inlet by barb outlet configuration for installation with poly pipe.
• Unique, easy-to-turn patented pressure assisted flow control mechanism.

• Pressure: 15 to 150 psi (1,0 to 10,4 bar)
• 075-DV Flow: 0.2 to 22 GPM (0,05 to 5,0 m3/h; 0,01 to 1,39 l/s). For flows below 3 GPM (0,75 m3/h; 0,21 l/s) or any Xerigation® application, use RBY-075-200MX Filter installed upstream.
• 100-DV Flow): 0.2 to 40 GPM (0,05 to 9,08 m3/h; 0,01 to 2,52 l/s). For flows below 3 GPM (0,75 m3/h; 0,21 l/s) or any Xerigation® application, use RBY-100-200MX Filter installed upstream.
• Temperature: Up to 110° F (43° C)
• Ambient air temperature: Up to 125° F (52° C)
• 24 VAC 50/60 Hz (cycles per second) solenoid power requirement:
• 0.30 A (7.2 VA) inrush current; 0.23 A (5.5 VA) holding current
• Solenoid coil resistance: 38 Ohms
  

• Height: 4 1/2" (11,4 cm)
• Height (Angle): 5 1/2" (14 cm)
• Width: 3 1/3" (8,4 cm)
• Length: 4 3/8" (11,1 cm)
• Length (Angle): 3 3/4" (9,5 cm)
• Length (MM): 5 3/8" (13,6 cm)
• Length (MB): 5 3/4" (14,6 cm)