SIGNATURE 6000 SERIES ROTORS:

The Signature 6000 Series Rotor provides superior coverage for small and medium turf areas.

The Signature 6000 Series Rotors have top quality features including Acu-Cover nozzles for better close-in watering, continuous full or part-circle options in one head, and the NIR2 adjustment feature. The Signature 6000 series is also available in a stainless steel model for added durability.

*Nelson Turf has been acquired by Signature Control Systems, Inc. effective September 19, 2008.

This is a 3D image. To rotate, click on the product image above and move your mouse from left to right.

• NIR2 feature (Nozzle Insertion/Radius Reduction) on all models eliminates the need to remove the cap for nozzle adjustments
• Eight interchangeable Acu-Cover nozzles--ranging from 1.0 to 9.5 gpm
• Seven optional low-angle nozzles (13 degrees) for windy areas or for throwing under trees
• Highly reliable water-driven gear motor (over 200 million gear stacks produced)
• Pro 6012 pops up a full 12". Ideal for shrubs and ground cover areas; at the base of hillsides where risers are not appropriate and where liability is a concern
• Click-Set collars are quick and easy to adjust
• Continuous 360 degree rotation or part-circle adjustable 40 degrees to 310 degrees
• Ratcheting slip clutch protects gears and motor from damage while adjusting turret for part-circle adjustments - wet or dry
• Wrench; piston clamp and installation instructions included (Model 6001 has no clamp)
• Bypass valve reduces pressure loss and standardizes rotation speed regardless of nozzle size.
• Optional lavender rubber cover identifies reclaimed water site - molded in - Reclaimed Water - Do Not Drink - in English and Spanish (6090).
• 5 year warranty on materials and workmanship

• Operating range:
  20-65 psi (6000; 6001)
  25-65 psi (6002; 6005; 6012)
  
• Maximum pressure: 75 psi
  
• Discharge: 1.0 to 9.5 gpm
  
• Spray trajectory: 25 degrees (13 degrees optional)
  
• Pop-up height:
  4" (6000; 6002; 6005)
  12" (6012)
  
• Body height:
  7-1/2" (6001)
  7-3/8" (6000; 6002; 6005)
  16-7/8" (6012)
  
• Exposed cap diameter: 1-7/8"
  
• Cap diameter: 2-7/8"
  
• Type of cap:
  rubber (6000; 6002; 6005; 6012)
  plastic (6001)
  
• Inlet size: 3/4" female (NPT and BSP)
  
• Screen mesh: .045 sq. in./1150 micron
  
• ADV comes with 6002; 6005 and when installed will hold back up to 10 degrees difference in elevation

Manual (391 KB) Brochure (391 KB)

Signature 6000 Series Cutaway

1. Rubber cover on pop-up models is safe and vandal resistant. All models are designated with model number stamped in rubber cover for easy identification.
   
   Ribbed case on the 6500-ADV series provides stability in loose soil.
   
   
2. Vandal-resistant optional locking screw is available on all models. Standard on 6005's.
   
   
3. Double-lipped wiper seal and stainless steel retraction spring reduce unnecessary service calls by assuring positive retraction; even in sandy soils
   
   
4. Patented Click-Set disk is adjustable in part-circle patterns in 5 degree increments. Memory ring resets pattern even if sprinkler is turned outside set pattern.
   
   
5. High-torque planetary gear motor is water-lubricated to provide oil-free; quiet; reliable performance.
   
   
6. Large area filter protects working parts with less frequent cleaning.
   
   
7. ADV available on all models (except 6001); shipped with 6005.

Signature 6000 Series Blue Nozzles
Performance Chart