SIGNATURE RAIN-TRIP RAIN SENSOR:

The Rain-Trip is designed to work with all Signature (Nelson) controllers and will work with many controllers made by others.

The Rain-Trip can be mounted, using the aluminum brackets, to the side of a structure or with the brackets removed it can be threaded onto a length of conduit using the molded in threads at the bottom of the housing. In either case be sure the Rain-Trip is installed upright and in a location where the rainfall is not blocked.

Warning: The Rain-Trip is designed to be used only with 24 Volt Irrigation systems. Use with higher voltages could result in injury or fire hazard.

• Unit ready for bracket mount or 1/2" conduit/pipe
  thread mount at bottom
• Adjusts easily from 1/8" to 1" rainfall
• Compatible with most controller brands (Ready for
  normally-closed or normally-open hookup)
• Supplied with 25 feet of hookup wire
• Saves unneeded watering
• Designed to be used with low voltage irrigation
  systems only