America's Most Shopped Online Sprinkler Store


left for same-day shipping

Order within 1 hrs 00 mins for same-day shipping.

  Home > Drip Irrigation > Drip Fittings > Threaded Fittings >

Tempo FCAP75 - 3/4 inch FHT Cap w/ washer
Tempo FCAP75 - 3/4 inch FHT Cap w/ washer
Our Price: $0.63
Sale Price: $0.42
You save $0.21!

Product Code: FCAP75

Description Reviews

3/4 inch FHT Cap w/ washer

Compression fittings are among the most common connection style fittings used in drip irrigation systems to connect sections of either 1/2" or 3/4" solid drip irrigation tubing or dripperline. Compression fittings have an internal compression ring that squeezes the outside diameter of the tubing as it is inserted into the fitting. The sharp edge of the ring bites into the soft tubing to prevent the tubing from blowing off the fitting and also creates a water tight seal. Compression fittings are more of a permanent connection and are not recommended for reuse. Once the tubing is inserted into the fitting it is very hard to remove the tubing. The compression fittings are available to fit a range of tubing from to and all are color coded to indicate the appropriate tubing outside diameter they fit. The range of compression fittings includes couplings, tees, elbows, male thread adapters, spigot adapters and end plugs.

Features and Benefits

  • Secure and easy installation without glue or clamps
  • Color coded for easy size identification
  • Large inside diameter for maximum flow
  • UV-resistant
  • Three sizes to fit 1/2" or 3/4" drip tubing (from 0.620" to 0.940" OD tubing)


  • Operating pressure: 45 PSI max

Use With

  • Can be used with 1/2" or 3/4" drip tubing with outside diameters ranging from 0.620" to 0.940".

Browse for more products in the same category as this item:

Drip Irrigation > Drip Fittings > Threaded Fittings