TORO 260 SERIES IRRIGATION VALVES:

Toro 260 Series Control Valves are perfect for large residential and light commercial uses, working especially well in light to moderate debris water. While other valves may clog easily in these conditions, these valves will continue to function.

This is a 3D image. To rotate, click on the product image above and move your mouse from left to right.

• Single-piece rubber diaphragm for reliable, leak-free closing
• Tough, glass-filled Zytel cap and body allow this valve to be rated up to 150 psi
• Manual flow control adjustable to zero
• Self-cleaning, stainless steel metering pin
• External manual bleed
• Low-inrush solenoid
• 18" (45cm) lead wires (electric models)
• Single-piece rubber diaphragm
• Recycled water flow-control knob available
• Two-year warranty

• Recommended flow range (by size):
  • 1" (25mm): 5.0-30.0 GPM (19-114 LPM)
    
• Operating pressure (by size):
  • 1" (25mm): 20-150 psi (1,4-10 Bar)
• Solenoid:
  • 24 V ac (50/60 Hz)
    Inrush: 0.30 amps, 7.20 VA
    Holding: 0.20 amps, 4.80 VA
• Dimensions:
  • 1" (25mm):
    -250 (with flow control): 6" H x 4-1⁄2" W (152 x 114mm)
    -260 (w/o flow control): 4-1⁄2" H x 4-1⁄2" W (114 x 114mm)