Toro 570Z PRX Series Spray Sprinklers
570Z-4P-PRX

Pop-Up Height: 4"
Overall Body Height: n/a
Bottom: ½" female threaded inlet
These Pop-Up Spray Heads are sold body ONLY (nozzles not included).
Nozzles purchased separately to allow you to choose exact pattern and radius (distance) that you need.

Note: If the overall height of spray head is too tall for your application; you can use a Hunter Pre-Made Swing Joint to move the head off the pipe and allow you to bury it deeper.
 

Featuring an in-riser pressure regulator and X-Flow shut-off device; 570Z PRX models are ideal for applications with high or varying operating pressure; including long lines and slope applications.

570Z sprinklers come with a degradable flush plug to conserve our natural resources. Not only environmentally friendly; but convenient too - these plugs won't litter an installation site.

Features

• Patented in-riser pressure regulator
  • Maintains constant 30 PSI (2 Bar) outlet pressure
  • Eliminates misting and fogging caused by pressures above 30 PSI (2 Bar)
• Patented X-Flow high-flow shut-off device built into the riser
  • Restricts water loss by 98% if the nozzle is removed or damaged; eliminating potential erosion or safety issues
  • Allows for nozzle and filter replacement or maintenance; while the system is running
• PRX stamped on cap for easy identification
• Zero-flush seal prevents flushing on pop-up; enabling more sprinklers to be placed on same zone
• Retraction flushing clears debris for reliable pop-down
• Environmentally friendly; degradable flush plug
• Side-inlet models available on 6" (150mm) sprinkler bodies for easier installation and vandal resistance
• Non-side-inlet models available on 6" (150mm) sprinkler bodies for sandy soils or applications prone to high-pressure surges and spikes

• 4" (100mm) and 6" (150mm) pop-up heights
• 4P; 6P; and 6P-SI

Specifications

• Recommended operating pressure: 20-75 PSI (1;4-5;2 Bar)
• Maximum operating pressure: 75 PSI (5;2 Bar)
• Dimensions:
  • Body diameter: 1-3/8" (35mm)
  • Cap diameter: 2" (50mm)
  • Side inlet: 4-3/4" (120mm) from the top of sprinkler to center of side inlet
• 1/2" (13mm) female threaded inlet