View Cart Checkout
 

Order within 0hrs 0mins for same-day shipping!
*Not available with backorder/drop-ship items. See Shipping Policy



  Home > Valves > Electric-to-Hydraulic Converters >

  Toro EHC-01-12 12 Zone Electric-to-Hydraulic Converter (Normally Open)
Toro EHC-01-12 12 Zone Electric-to-Hydraulic Converter (Normally Open)
 



Our Price: $479.86


Product Code: EHC-01-12
Qty:

Description
 
Untitled Document
Toro EHC-01-12 - 12 Station Electric-Hydraulic Converter  
Toro EHC-01-12 - 12 Station Electric-Hydraulic Converter


Product Manuals
Not Available
360 Degree Product View
Not Available
Product Videos
Not Available
Performance Charts
Not Available
Product Information

TORO EHC-01-12 NORMALLY OPEN 12-STATION ELECTRIC-HYDRAULIC CONVERTER:

Toro® Electric-Hydraulic Converters (EHC) provide the ability to bring together electrical outputs from sophisticated electric controllers and the pressure-based signals in hydraulic irrigation systems. EHC is ideal for retrofitting hydraulic
systems, enabling Normally-Open (NO) or Normally-Closed (NC) hydraulic valves to be operated with a 24 VAC output irrigation system controller. For new installations, hydraulic control valves are ideal for applications in areas with increased lightning risk or poor water conditions. What's more, you can add as many converters as you need – expansion is unlimited.

Installation of an Electric to Hydraulic Converter (EHC) assembly module enables Normally-Open (NO) or Normally-Closed (NC) hydraulic control valves to be operated with a 24 VAC output irrigation system controller. In addition, the EHC provides a convenient method of manually operating single or multiple valves without controller assistance.

The Normally-Open EHC is identified by White control selectors and its supply filter assembly connected to the left hand tubing port. The Normally-Closed EHC is identified by Black control selectors and its supply filter assembly connected to the right side tubing port.

The modular design of the EHC enables it to be installed in various types of controller installations. Two screws holes are provided in each module mounting plate for pedestal cabinet or wall installation. If sub-surface installation is required, the converter modules can be simply placed inside a valve box or vault-type enclosure.

CAUTION: If hydraulic converter installation site is subject to freezing temperature conditions, installation of proper thermal protection (i.e., heat-generating device) must be installed to ensure that water inside the coverter does not freeze. Failure to do so will result in severe damage to the converter assembly and VOIDS THE PRODUCT WARRANTY. Please contact your Toro distributor for recommended freeze protection methods, devices and information.
Specifications & Features
  • Pressure: 40-150 psi
  • Wiring: 19 AWG x 4' wire leads
    • Maximum distance from converter to valve: 3/16" - 500'; 1/4" - 1000'
  • Normally open: Valve evaluation should not exceed 25' above 70' below controller elevation
  • Direct manual control activates my sprinkler from the converter
  • Warranty: 2 years
Specifications
  • Input power:
    • 24 VAC (60 Hz)
    • Holding - .225A @ 24 VAC
    • Inrush - .400A @ 24 VAC
  • Dimensions:
    • 4 Station: 8-3/4" W x 4-1/2" H x 2-1/2" D
    • 12-Station: 8-3/4" W x 12-1/2" H x 2-1/2" D
    • 16-Station: 8-3/4" W x 16-1/2" H x 2-1/2" D



Browse for more products in the same category as this item:

Valves > Electric-to-Hydraulic Converters
Toro
 
   
  Built with Volusion