TORO P-220 SERIES IRRIGATION VALVES:
These heavy-duty glassfilled nylon valves are specially designed for commercial applications with pressures up to 220 psi, but also have the ability to pressure regulate the flow through the valve anywhere from 5-100 psi. |
| Features & Benefits |
- 220-psi (15 Bar) maximum
pressure rating
- Tough, 33% glass-filled nylon
(GFN) and stainless steel
construction
- Globe/Angle configuration
- Rugged, reinforced bonnet
design withstands tough and
high-pressure applications
- Precise pressure control option
with compact EZReg dial-design
technology (factory- or
field-installed - no need
to remove solenoid)
- Pressure regulates in electric
and manual modes, serviceable
under pressure
- Forward-flow design for more
precise regulation
- Standard, built-in Schrader-type
valve for downstream
pressure verification
- Anti-vandal dust cap on
pressure-regulating models
- No external tubing for
either electric or pressureregulating
models
- Internal downstream manual
bleed keeps valve box dry
- External manual bleed for
system flushing
- Ergonomic manual flow control:
adjustable to zero flow
- Flow control independent of
solenoid
- Tough, double-beaded, fabricreinforced
rubber diaphragm
rated at 750-psi (50 Bar) burst
pressure
- Self-aligning bonnet to ensure
correct installation
- Stainless steel spare nut
for convenience
- Skirt on flow control for
debris resistance
- Self-cleaning, stainless steel
metering rod
- Brass flow control stem - 2" and
3" (50mm and 75mm) models
- Positive O-ring seal on inlet
plug prevents leaks
- Low-flow capability down to
5 GPM (20 LPM)
- Easily serviced without system
removal
- Proven, encapsulated, injectionmolded
solenoid with captured
hex plunger and spring
- Low-power requirement for
longer wire runs
- 18" (45cm) lead wires for easy
installation
- Recycled water solenoid with
tag assembly available as a
service kit (Part No. RW60-Kit)
- Five-year warranty
|
|
Toro P-220 Series Valve Cutaway |
|
| Specifications |
- Flow range:
- 1" - 5 - 50 GPM
(25mm - 20 - 200 LPM)
- 1-1⁄2" - 30 - 110 GPM
(40mm - 120 - 400 LPM)
- 2" - 80 - 180 GPM
(50mm - 300 - 680 LPM)
- 3" - 150 - 300 GPM
(75mm - 600 - 1100 LPM)
- Operating pressure:
- Electric: 10 - 220 psi
(0,7 - 15 Bar)
- Pressure regulating models:
- Outlet: EZR - 30
5 - 30 psi, +/- 3 psi
(0,3 - 2,0 Bar, +/- 0,2 Bar)
- Outlet: EZR-100
5 - 100 psi, +/- 3 psi
(0,3 - 7,0 Bar, +/- 0,2 Bar)
- Inlet: 15 - 220 psi
(1,0 - 15 Bar)
- Minimum pressure differential
(between inlet and outlet
required for regulation):
10 psi (0,7 Bar)
- Burst pressure safety rating:
750 psi (50 Bar)
- Body styles:
- Globe/angle valve - 1", 1-1⁄2", 2"
and 3" (25mm, 40mm, 50mm,
75mm) female-threaded inlet
and outlet
- BSP threads available
- E2003 DC-latching solenoid
available
- Solenoid: 24 V ac (standard)
- Inrush: 0.40 amps, 11.50 VA
- Holding: 0.20 amps, 5.75 VA
- Dimensions:
- 1" - 6-3⁄4" H x 3-5⁄8" W
(25mm - 171mm x 92mm)
- 1-1⁄2" - 7-1⁄4" H x 3-5⁄8" W
(40mm - 184mm x 92mm)
- 2" - 9-1⁄2" H x 6-1⁄8" W
(50mm - 241mm x 156mm)
- 3" - 10-3⁄4" H x 6-1⁄8" W
(75mm - 273mm x 156mm)
|
|
|
