TORO TR70XT SERIES ROTORS:
The TR70XT-P has patented X-Flow shutoff device built into the riser to turn off sprinkler flow allowing for maintenance or partial installations. The exclusive TruJectory adjustments from 5 to 25 degrees for fine-tuning nozzle spray trajectory to avoid low-hanging branches or compensate for the wind. The Smart Arc memory returns sprinkler to previously set arc if vandalized and slip clutch assures no damage to gears. The continuous unidirectional rotation provides uniform coverage when set at 360°.

• 5" Pop-up to Clear Tall Grasses
• Factory-installed #3.0 Nozzle
• Arc Adjustment From 30° to 360°
• Laser-etched Indications on Cap
• Large Filter Screen to Prevent Clogging
• Adjustable - Simple to set and easy to adjust watering patterns:
  • Left arc indicator on cap (arrow) and on body (hash mark)
  • Right trip indicator on gray adjusting band
  • Stainless-steel radius adjustment screw allows up to 25% radius reduction
• Check Valve - Standard reversible check valve prevents low-head drainage; keeping laterals charged with water.
• Design Elements:
  • Cluster; water-lubricated; gear-drive design
  • Slip clutch assures no damage to gears if vandalized
  • Unique; over-molded wiper seal for greater debris resistance and below-grade installation
• Uniform Coverage - Continuous; unidirectional rotation provides uniform water coverage when set at 360°.
• Smart Arc™ Memory - Returns the sprinkler to the previously set arc if vandalized.
• Nozzle Tree - TR50 Series sprinklers feature an eight-nozzle tree and easy interchanging.

• Radius: 9,8 –21,7 m (32’–71’)
• Flow rate:26,5–113 LPM (7,0–29,6 GPM)
• Recommended operating pressure range:25–100 PSI
• 1" female-threaded inlet
• ½" below-grade installation (except shrub models)