Step 1: Remove Contents from the Tube.
Step 2: Place Installer inside empty tube.(* Installer sold separately)
Step 3: Using a sledge hammer, install the tube in undisturbed soil with a slight angle away from the tree.
Step 4: Slide loose end thru built in loop and pull the strap snug around the trunk.
Step 4: Attach cam buckle to the top hole.
Step 6: Slide the loose end of the harness thru the came buckle
Step 6: Pull the harness thru the cam buckle till snug, use zip tie to fasten excess strap. You can paint the tubes the color of mulch, then back full and mulch.
Step 6: You're Done!!
Drop in the fertilizer tablet and the root ball is stabilized and receiving water, oxygen and fertilizer at the same time giving this new tree a superior growing environment.