View Cart Checkout
 

Order within 0hrs 0mins for same-day shipping!
*Not available with backorder/drop-ship items. See Shipping Policy



  Home > Lawn & Garden > Root Watering Devices >

  Underhill A-DD14 14.5 in. Deep Drip Tree Watering Stake
Underhill A-DD14 - 14-1/2 inch Deep Drip Tree Watering Stake
 



Our Price: $9.56


Product Code: A-DD14
Qty:

Description
 
Untitled Document
 


Product Manuals
Not Available
360 Degree Product View
A-DD14
Product Videos
Not Available
Performance Charts
Not Available
Product Information

UNDERHILL DEEP DRIP TREE WATERING STAKES:

DEEP DRIP Tree Watering Stakes aid in the watering and fertilization of your trees at the roots, in addition to better aerating the soil with oxygen. Deep Drip will deeper saturate the ground around your tree allowing the roots to grow deep and strong instead of horizontally at the surface, possibly resulting in exposed roots. This device is designed to work with a garden hose, flood irrigation, or in conjunction with your automatic landscape drip system.

Your standard 1/4" drip line easily connects to the Deep Drip spike. And you can also add fertilizer into the shaft to continually direct nutrients to the root zone. Whether you have fruit, oak, or palm trees, start watering your trees where the roots are and where you want them to be. Roots tend to follow the water source, so show your roots the path to grow deep. When you can get water underground faster, you can water for shorter periods, while practicing sensible water conservation. Our Patent Pending Deep Drip tree root watering devices are made in the U.S.A. and come in three sizes: 14, 24, and 36 inches.

Our Deep Drip tree root watering devices come in three lengths: 14 ½, 24 ½, and 36 inches. The 14 ½ inch unit is perfect for small trees and shrubs with shallow roots, like rose bushes, ornamental trees, or in commercial use for trees still in boxes. The 24 ½ inch unit is used for your average trees, while the 36 inch unit may be used for palm trees and deeper rooted trees.

A-DD14
A-DD24
A-DD36

The devices are constructed of sturdy ABS and PVC. The reinforced tip and cap are made from ABS, while the upper shaft is made from Schedule 40 PVC. There are multiple holes in the bottom half of the spike, internally covered by a mesh filter that allows water to flow out, but keeps dirt from getting in, settling, and clogging the tube. The UV protected cap has multiple functions, as it acts as a Protective/reinforced cover when hammering in to the ground, keeps rocks and leaves from entering the shaft, and holds the ¼ inch drip line securely in place. And in many parts of the country, the cap also protects the emitter head from squirrels or other animals.  

Periodically, as the tree grows and roots extend farther away from the tree, repositioning the device beneath the outer edge of the tree's canopy is recommended. The upper shaft has two holes at the top so the user can remove and replace the unit as needed. Just insert a screwdriver or like tool through the holes and pull up.

Features and Benefits
  • When connected to a drip line, Deep Drip is one of the most effective devices to get water, oxygen, and fertilizer to your tree's roots quickly and efficiently.
  • Deep Drip will conserve water as 100% of the water directed to the tree is going deep into the ground, without losing any water to evaporation or run-off. And the internal filter keeps dirt and rock from entering the device.
  • Deep Drip will promote deeper roots as they will follow the deeper watering.
  • Furthermore, Deep Drip will guard against visible roots rising to ground level for water. Water dispersed solely from a standard drip-line can permeate only so deep into the ground.
  • Tree fertilizer can be fed into the shaft, having water pass through the granules and carry the nutrients into the soil and directly to the roots, thus promoting a healthier tree and root system.
  • Fertilizing within Deep Drip, instead of through an emitter, guards against clogged emitters or tubing, with no waste.
  • When inserted on a slope , Deep Drip prevents water from running down the hill away from the tree while eroding the landscape. The tree will benefit from getting more water into the ground and to the roots, while less water will be wasted down the hill.
  • When considering the costly replacement of a dead tree, purchasing and installing two or three Deep Drip devices per tree is a smart investment for homeowners and HOAs, as well as landscapers and nurseries who guarantee a tree's survival.
  • Deep Drip is the most hassle-free, maintenance-free tree deep-watering device on the market that once you place it into the ground, you'll never have to worry about it again. No need to pull out the hose, turn it on, and remember to turn it off, as Deep Drip works with automatic drip systems.
  • When tree owners water and feed more effectively , trees have a better chance of surviving after being planted. And throughout the lifespan of the tree, it will receive continual deep watering and fertilization as a healthy lifetime solution.
  • For existing trees, the 'pointed' end and reinforced cap allows for driving into the ground with a sledge hammer when digging a hole is not a consideration.
  • The shaft can be completely buried and out of sight or left with the UV Protected cap above ground.

Underhill Deep Drip Tree Wating Stake Models:

Installation

There are two ways to install the Deep Drip tree watering stakes. Either by inserting the units during new planting or by driving the unit into the ground (while wearing protective eye wear, of course) around an existing tree. The reinforced pointed tip and specially designed cap are engineered to take quite a beating.

During one test in extremely hard ground, our researchers used a 3-pound sledge hammer, pounding the device 484 times to get a 36" unit into the ground. Obviously, this was very hard ground and most installations may only require a couple dozen hits, although we mention this to show you the strength and durability of our units.

Step 1: Designate a location for the Deep Drip tree root watering tool installation. Choose a spot free from underground lines and pipes; select the location that is approximately half way between tree trunk and outer edge of tree's canopy. Newer trees are recommended to have 2-3 units on opposing sides or surrounding the tree base.  Older, more established trees may need as many as 5-6 stakes to fill the circle around the tree (image below).

Step 2: During New Installation of Tree: After tree has been placed in the hole, insert 2-3 Deep Drip units vertically in the hole surrounding the tree before back-filling with soil. The top of Deep Drip can either be above ground level or below ground, depending on your preference.

Installation at Existing Tree: If you are installing Deep Drip at an existing tree where a hole no longer exists, then you will need to either dig a hole or drive Deep Drip into the ground manually. To drive into the ground using a sledge hammer, place slotted end cap on the open end of the shaft without the drip line inserted (Fig. 2). Always wear protective eye wear. Do not directly hammer the 'uncapped' end into the ground as this could break or destroy the shaft. A three-pound sledge hammer is recommended to drive the unit into the ground. Drive Deep Drip completely into the ground or leave the cap visible, whichever is preferable.

Troubleshooting: If soil is too dense, water the area around the tree and use a soil softener to soften the ground before inserting. Also recommend to insert stake or rod into the ground and remove to clear pathway for unit. Drilling into the ground using an auger bit is another way to clear pathway for unit. Again, make sure you are aware of any underground lines or pipes and do not insert where they may exist.

Step 3: When positioned in the ground, remove cap and insert end of existing drip line and emitter into the shaft aligning the drip line with the slot in the cap (Fig. 3). Re-install cap to secure drip line and stop excess debris from entering shaft. We also recommend to place an emitter at the surface in addition to the Deep Drip units (as seen in the illustrations on the Home Page).  This will ensure that the shallow roots will get the much needed water as well as the deeper roots. 

When using with a hose, we recommend that you create a small berm around your tree to hold in the water and prevent run-off. Bury 2-3 Deep Drip stakes equally spaced within the berm around the tree. Remove the caps from the stakes; lay the slow flowing hose within the berm and the water will saturate the shallow roots near the surface and eventually flow down into the stakes to water the deeper roots. The harder the ground, the slower and longer the flow you will need to saturate the root zone.

Idea: Pour granulated tree fertilizer into shaft after positioning in ground. Water will pass through and slowly dissolve nutrients, feeding the tree at the roots.

Step 4: To Remove: Insert rod or standard screwdriver through the two holes in the main shaft just below the cap. Slide the rod through the shaft and pull up (Fig.4).  Slightly twisting the shaft may be necessary for easier removal.  Every six months it is recommended to rotate the unit 360 degrees while in the ground to keep the small roots from entering the shaft.  Just insert a screwdriver or rod and twist.

Step 5: Watering and Fertilization: Ask your local lawn and garden professional for recommendations on watering levels, emitters, and different types of tree fertilizer, specific to your tree's needs.




Browse for more products in the same category as this item:

Lawn & Garden > Root Watering Devices
Underhill
 
   
  .