View Cart Checkout
 

Order within 0hrs 0mins for same-day shipping!
*Not available with backorder/drop-ship items. See Shipping Policy



  Home > Sensors > Flow Meters >

  Netafim WM-075-01-RSP Flowmeter Model M
Netafim WM-075-01-RSP Flowmeter Model M
 



Our Price: $121.50
Sale Price: $94.05
You save $27.45!


Product Code: WM-075-01-RSP
Qty:

Description
 
Untitled Document
Netafim Flow Meter Model M
Product Manuals
Not Available
Not Available

360 Degree Product View
Not Available
Performance Charts
Not Available
Product Information

Netafim WM-075-01-RSP Flow Meter

M Series Water Meters are the industry's smallest water meters. They offer the best cost, performance and long life. The M Series utilize the multi-jet principle assuring an equally distributed load on the impeller minimizing wear and maintaining accuracy. The WMR Series contain an in-line axial turbine which allows foreign matter to pass through the meter without clogging. Wide clearances in the measuring chamber and negligible area of contact between static and moving parts are the main reasons for the high reliability of this design even in hard water. Available in 3/4", 1", 1 1/2" and 2" sizes.


Features & Benefits
  • Industry's smallest water meters provide ±2% accuracy over a wide range of flows.
  • Magnetically driven sealed registers are stainless steel encapsulated and guaranteed not to accumulate moisture or fog.
  • 'M' Water Meters utilize the multi-jet principle assuring an equally distributed load on the impeller minimizing wear and maintaining accuracy.
  • 'M' Water Meters have only one moving part, the impeller, is in contact with the water for minimum wear and the utmost reliability.
  • 'WMR' Water Meters contain an in-line axial turbine which allows foreign matter to pass through the meter without clogging.
  • Wide clearances in the measuring chamber provide full pipe flow measurements and high reliability.
Installation Requirements 'M' Water Meter
  • Dial face must be horizontal.
  • There are no straight pipe installation requirements.
  • Prior to installation of the meter, the pipeline should be thoroughly flushed.
  • Meter must be installed so that the pipe will be full of water at all times during metering.
  • To eliminate air in the system, continuous acting air vents of proper size and type are required.
'W' Water Meter Specifications
  • Iron Body Sizes: 3/4", 1" and 1 1/2"
  • Plastic Body Sizes: 3/4" and 1"
  • Maximum Working Pressure: 140 psi
  • Maximum Liquid Temperature: 122°F
  • Body Material: Corrosion Proof Copper Alloy or Polypropylene (plastic)
  • Connections: Male Pipe Thread
  • Register Options: Reed Switch or Photo Diode
  • Reed Switch Register Pulse Outputs: 0.1 or 1.0
  • Photo Diode Register Pulse Outputs: 0.0015, 0.0021 or 0.0074
  • Straight Pipe Installation Requirement: None



Browse for more products in the same category as this item:

Sensors > Flow Meters
Netafim
 
   
  .