· Fail safe "reverse flow" design insures that the valve will remain closed in the event of a diaphragm wall failure and extends diaphragm life.

· Excellent for micro-irrigation; valve will operate as low as 1 GPH

· Dual diaphragm ports

· Internal manual bleed lever opens and closes the valve with a flip of the finger

· Heavy-duty glass filled body

· Shock cone incorporated in the diaphragm slows the water during closing to minimize water hammer

· 1" Thread and ISO models available

Performance Chart

Technical Information Model Specifications

12024E-10 (1 in. FIP/25mm nominal)*

12024EF-10 (1 in. FIP w/flow control)*


International: Specify ISO *

Operating Range

150 psi (10;0 bar) rating

Wiring requires a single lead from the controller to each solenoid; plus a common neutral to all solenoids; type UF wire; U.L. listed; in recommended for all hookups.

24 VAC/60 Hz 24 VAC/50 Hz
Inrush: 9.77 VA Inrush: 10.5 VA
Holding: 6.2 VA Holding: 6.88 VA

Do not use nominal voltage ratings listed above for sizing of valve wire.