The NEW Weathermatic Nitro Series' Unique "reverse flow" design permits equal pressure distribution on both sides of the diaphragm, regardless of line pressure, providing zero stress to prevent "stretching," a common cause of valve failure. Weathermatic Nitro Series Valves have a reverse flow design for water conservation in the event of failure. Try the NEW Weathermatic Nitro Series Valves today! Wiring requires a single lead from the controller to each solenoid, plus a common neutral to all solenoids; type UF wire, U.L. listed, is recommended for all hookups. Do not use nominal voltage ratings listed above for sizing of valve wires.
24VAC/60Hz |
24VAC/50Hz |
Inrush: 9.48 VA |
Inrush: 10.66 VA |
Holding: 5.11 VA | Holding: 5.97 VA |
Replacement Parts
Articles
Videos
Brand | Weathermatic |
---|---|
Body Material | Enginnering Grade PVC |
Flow Control | Flow Control |
Valve Type | In-Line |
Connection | Slip |
Type | Valve |
Application | Residential |
Solenoid | Yes |
Warranty | 2 Years |
Size | 1 in. |