Larger Landscape Areas

Larger Landscaped Areas
Flower Beds

Solution

BIGIE Stake, Poly Flex Riser / Adapter, XB Drip Emitters on Landscape Dripline

Advantages

Up to 60% water savings
No unsightly run off in high visibility areas
No damage to walls or entry ways
Supplemental XB Drip Emitters are placed to larger plants with higher water requirements

Installation & Materials List

Click-n-Buy - Click on Part Number to Add Items to Your Cart

Part Number	Description
BIGIE	Below Grade Irrigation Stake
XB xx	Pressure Compensating Drip Emitters (0.5 to 2.0 gph)
PFR / FRA	Poly Flex Riser / Adapter
LD 09 12	Landscape Dripline 0.9 gph @ 12" spacing
MDCF Series	Easy Fit Compression Fittings / Adapters

To-Do List

Description	Time (Approx.)
Assemble Control Zone Kit and connect to water source and Control Zone.	1 hr
Cut lengths of Landsape Dripline for LD grid in planting area.	10 min / 50 ft
Use MDCF Fittings to create LD grid. Install BIGIE stakes next to larger plants. Thread PFR/FRA into BIGIE Stake inlet. Thread XB-xx 10-32 in risers.	1 hr 30 min.
Flush zones for 2 minutes.	2 min.
Install planting material

Installation and Maintenance Tips

Description

Flush the zone after installation and once a year.

For larger trees, use higher flow PC Modules and DIffuser Caps to avoid wash out.

Adjust watering time as seasons / weather changes.

Cut Poly Flex Risers slightly above grade (before installing the XB XX Emitters) for an 'invisible' installation.

Poly Flex Adapter (FRA) is made of Marlex® so no Teflon® is needed.

Click-n-Buy - Click on Parts in Picture Below to Add Items to Your Cart