America's Most Shopped Online Sprinkler Store


left for same-day shipping

Order within 1 hrs 00 mins for same-day shipping.

Pots / Baskets / Misc.
Patio Pots On a Separate Zone
(Page 1 of 2)

Xeri-Bird 8 and XB Drip Emitters on a PVC Lateral

  • Up to 60% water savings
  • Xeri-Bird 8 manifold with PRS offers perssure regulation, filtration and controlled watering to multiple pots
  • Manifold allows for increase / decrease in future plant water demands
Installation & Materials List

Click-n-Buy - Click on Part Number to Add Items to Your Cart

Part Number



Xeri-Bird 8 Outlet Manifold

XB xx

Pressure Compensating Drip Emitters (0.5 to 2.0 gph)


In-stem 30 psi Pressure Regulator


1/4" Distribution Tubing

TS-025 w/CAP

1/4" Tubing Stake with Bug Cap
PVC Misc
PVC Laterals, Fittings, Glue

To-Do List

Time (Approx.)
Trench (as needed), cut, and glue PVC laterals. Varies by application
Connect lines to water source. 1 hr
Thread XBD-80 manifold onto PRS-050 then connect to PVC tee. 5 min / Assembly
Attach 1/4" distribution tubing to outlest on XBD-80 manifold. 3 min / XBD-80
Run 1/4" lines to sparse plantings, stake in place with a bug cap on end. 8 min / Pot
Install the desired Drip Emitter inside XBD-80 manifold. 2 min

Installation and Maintenance Tips

Flush the zone after installation and once a year.
Install Drip Emitters in XBD-80 with self-piercing barb end up.
Run 1/4" tubing through the drain hole in the bottom of the pot for invisible installation prior to planting.
Leave 6" slack in 1/4" tubing next to mainfold in case of unexpected maintenance.



Click-n-Buy - Click on Parts in Picture Below to Add Items to Your Cart