While shopping for emitters for your drip irrigation system, you might notice that some are label as pressure compensating emitters, while others are not. So now you have to wonder if this is an important difference, and if so, which type do you need?
Although many manufactures may claim that their emitter is pressure compensating - which is true to a point, since all emitters, by design, will regulate pressure to some degree - a true pressure compensating emitter is actually intended to release water at a uniform rate. This uniformity will be reliable even under a wide range of available water pressures. Most emitters that meet this standard will involve the use of a rubber diaphragm, which will probably not be evident without actually cutting an emitter open and taking a look at it. An easier solution, though perhaps not as reliable, is to study the emitter's specifications. If these show a fairly steady water flow rate at differing PSI levels, the emitter is probably a pressure compensating one.
Some professionals believe that pressure compensating emitters are a better choice, since they allow the same amount of water to be delivered all along the line, regardless of the placement of the emitter or the length of the tubing. However, there are generally only two conditions under which you should considered pressure compensating emitters a requirement. One is when the elevation of the irrigation area varies by more than five feet. They are especially helpful where the system is installed on either a slope or through a low-lying area. The other condition is when you are wanting to extend a irrigation system design past its standard limitations, such as wanting to use a longer length of drip tubing than is recommended, or adding larger numbers of emitters to one line. Although this is not a good idea, the use of pressure compensating emitters will maintain a more effective system.
If you wish to use pressure compensating emitters in all areas of your drip irrigation system, it will usually be okay. Your wallet will just take a bigger hit. However, there is one exception. Pressure compensating emitters are not compatible with very low water pressure systems, such as gravity flow drip systems, and often will not work at all. So it is best to avoid them in those situations.
- The Do-It-Yourself Sprinkler Store -