OVERVIEW
This specification covers requirements for an underground shielded cable
designed to transmit and receive signals between irrigation satellites, central
computers, weather stations, and sensors. The cable utilizes stranded insulated
conductors, aluminum shield and drain wire to minimize electrical, magnetic, and
radio frequency interference. This cable is wrapped with stainless steel tape
armor for protection against rodents and for shielding of lightning and power surges. This armored version is only necessary for conditions that are rodent heavy, otherwise shield cable is sufficient for most applications.
The cable is listed by UL or ETL or CSA
|
INSULATION
PVS, yellow & gray
|
SHIELDING
A 2 mil aluminum backed polyester shielding with a #16 AWG solid tinned copper drain wire in contact with the aluminum side with a 25% minimum overlap
|
|
CABLE ASSEMBLY
The insulated conductors and the drain wire are twisted together with a 3" maximum lay
|
JACKET
Black Polyethylene, sunlight and moisture resistant.
|
|
CONDUCTORS Stranded soft annealed tin coated copper conforming to ASTM-B-3 and B-8.
|
SURFACE PRINTING
PAIGE ELECTRIC P7162D-A LISTING AGENCY AND NUMBER 16 AWG 1PR SHIELDED/ARMORED 30V SPRINKLER SYSTEMS WIRE AND/OR UNDERGROUND LOW ENERGY CIRCUIT CABLE RoHS COUNTRY OF ORIGIN. SEQUENTIAL FOOTING EVERY 2"
|
*Also Known as Toro wire and/or Toro Cable
|
|
|