Blazing TLC-30-10 10 Twist Locking Large Wire Combinations
Features & Benefits
- Twist LOC* Waterproof Connectors with Pre-Filled Silicone
Installation Instructions
- Turn off power before installing or removing
connectors.
- Strip wires 1/2" (12.7mm) & align frayed
strands and conductors. (NOTE: Not
necessary to pre-twist)
- Hold stripped wire ends -- evenly together.
Lead stranded wire(s) beyond solid wire ends
by approximately 1/16" (1.6mm).
- Firmly hold wire combination together
and insert it through the center of the cap on
the end of the connector.
- Continue to push & twist (clockwise) until hand
tight - 1 to 2 wire wraps
(NOTE: For optimum water proofing. Swipe any excess
silicone in and around the wires) * Locs out moisture.
Suggested Blazing Wire Combinations:
(solid and/ or stranded, Cu/Cu Only)
- 2 #14 w/1-2 #12
- 2 #16 w/1-3 #12
- 1-3 #10 or 12
- 3 #18 w/1-3 #12, 14 or 16
- 2 #16 w/1-2 #10
- 2 #16 w/1-4 #14
- 1-6 #14 or 16
- 1 #18 w/1-4 #12 or 14
- 2-6 #18 or 20
- 1-2 #18 w/1-2 #10
- 4 #12 solid
- 1 #18 w/1-4 #12 or 14