Blazing TLC-10-200 Twist Locking Small Wire Combinations
Features & Benefits
- Twist LOC* Waterproof Connectors with Pre-Filled Silicone
Installation Instructions
- Turn off power before installing or removing
connectors.
- Strip wires 1/2" (12.7mm) & align frayed
strands and conductors. (NOTE: Not
necessary to pre-twist)
- Hold stripped wire ends -- evenly together.
Lead stranded wire(s) beyond solid wire ends
by approximately 1/16" (1.6mm).
- Firmly hold wire combination together
and insert it through the center of the cap on
the end of the connector.
- Continue to push & twist (clockwise) until hand
tight - 1 to 2 wire wraps
(NOTE: For optimum water proofing. Swipe any excess
silicone in and around the wires) * Locs out moisture.
Suggested Blazing Wire Combinations:
(solid and/ or stranded, Cu/Cu Only)
- 1#18 w/1-5 #20
- 1 #16 w/1 #18
- 2#18 w/1-4 #20
- 2-6 # 18
- 4 #18 w/1 #20
- 1 #14 w/1 or 2 #16
- 2 #16 w/1 #18 or #20
- 3 #16 w/1 #18 or 20 or 22
- 3-6 #20
- 2 #14
- 2 #14 w/1 #18
- 4 #20 w/1 #22
- 1 #14 w/1-3 #18 or #20