 |
 |
 |
|
12" POP UP MICRO SPRAYER - MP-12X
The MP Series Pop-Up Micro Sprayers are designed to provide solutions where low pressure and low flow rate are required. Pop-Ups are helpful where conventional sprinkler systems or drip irrigation would not be practical. The MP series utilizes double seals to ensure reliable operation and long-term performance.
|
|
|
|
MP-121
|
1/2' MNPT inlet - 90 degree spray head
|
|
MP-122
|
1/2' MNPT inlet - 180 degree spray head
|
|
MP-123
|
1/2' MNPT inlet - 360 degree spray head
|
|
MP-124
|
1/4' barbed side inlet - 90 degree spray head
|
|
MP-125
|
1/4' barbed side inlet - 180 degree spray head
|
|
MP-126
|
1/4' barbed side inlet - 360 degree spray head
|
- 12" Pop-Up length
- Unique design incorporates a pressure activated, low friction, upper stem seal and a second stage piston seal to ensure positive sealing.
- Can be installed on any size 1/2" poly tubing
- Can be used with 1/4" distribution tubing
- Rugged materials can withstand adverse conditions
- Install below grade
- Flow Rates: .15 -.63 GPH
- Operating Pressure: 15-35 PSI
- Wetting Diameter: up to 5'
- Trajectory: Flat
- Available with 1/2" MNPT thread or 1/4" barbed side outlet
- Precipitation Rate: 2.0-2.8 inch/hour
- Filter Requirement: 120 Mesh
- Body and Piston: Semi-Rigid Polypropylene
- Seals: EPDM and Vinyl
- Base: High Impact Plastic
- Spring: Stainless Steel 304
|
|
|
Back to: Drip Irrigation
|
|
|
 |
|
 |
|
|
|
SHOP ALL 
