The Do-It-Yourself Sprinkler Store


left for same-day shipping

Order within 1 hrs 00 mins for same-day shipping.

  Home > Lawn Irrigation > Controllers & Timers > Battery & Solar Powered Controllers > Dig Battery Operated Controllers >

DIG 1 Station Waterproof Plastic DC Powered Controller | B092A
Hose End Timer

Our Price: $38.97
Sale Price: $28.98
You save $9.99!

Product Code: B092A

Description Reviews
Untitled Document
DIG Hose End Timer
Product Manuals

360 Degree Product View
Not Available
Performance Charts
Not Available
Product Information

DIG B092A 3/4 in. Hose End Timer with 2 Dials

DIG's B092A Two-Dial Hose Timer has joined DIG's innovative and rugged line of battery operated controllers and timers offering simplified programming and improved monitoring of battery power for reliable operation. With a higher flow rate at lower inlet pressures and a range of simple programming features, the B092A delivers a reliable and cost effective solution for residential uses. The B092A hose timer has up to four start times per day with 2 minute to 4 hours programming duration and an operating flow range of .1 to 6.3 gallons per minute for use in a wide range of applications, including drip irrigation or micro sprinkler systems connected to a garden hose or faucet/spigot. This hose end timer uses one 9-volt alkaline battery that can last for up to one year.

DIG B092A 3/4 in. Hose End Timer Features & Benefits
  • 3/4 in. FHT inlet and MHT outlet
  • Watering duration from 2 minutes to 240 minutes
  • Eight watering intervals ranging from every 6 hours to once per week
  • Low battery auto lock out to ensure the timer cannot open unless it can close
  • Easy manual operations using a single button
  • Low energy use (less than 20 micro amps in standby mode) ensures long battery life
  • High water flow at normal water pressures
  • Operates on low water flows of less than 0.5 gpm
  • 14% of higher flow at 30 PSI
  • High strength female hose thread connection with easy removal via spring clip
  • Powered by one 9-volt alkaline battery with battery life up to one year
  • Weather resistant
  • 3 year limited warranty
How to Use

This hose end timer has a 3/4 in. swivel female hose thread inlet and male hose thread outlet so it can be attached to a garden hose or faucet/spigot. Our suggestion is to install the hose timer above ground to any male hose thread connection. The B092A Two-Dial Hose Timer uses 2-Dial and one button to program. The left dial is used to set the duration, the right dial is used to select the interval of operation, and the enter button is used to accept the program and start.

  • Battery
    • This hose timer requires one 9-volt battery (alkaline battery recommended).
    • 1. To install the battery, use firm pressure to lift the battery compartment cover in the back of the unit.
    • 2. Insert the male/female battery terminals into the female/male contacts of the battery harness, and place the battery in the battery compartment. Replace battery compartment cover in its proper place, ensuring a triangle is formed on the underside of the timer.
Hose End Timer Specifications
  • Flow rate up to 6.3 GPM at 30 PSI (24 L/PM at 2 Bar)
  • Temperature range: 40°F to 125° F (3° C to 50° C)
  • Operating pressure 10 PSI to 140 PSI (0.6 - 9.8 Bar)
  • Power source: 9-volt alkaline battery (not included)
  • Solenoid: durable electric motor
  • Power consumption 20 micro amps in standby mode.
  • Materials: body ABS and inner parts of high impact plastic
  • Dimensions: 6 in. D X 4 in. W x 6.5 in. H ( 15.2 cm X 10.0 cm X 16.2 cm)
Programming Options
  • 8 pre-set watering duration from 2 minutes to 240 minutes
  • Watering frequency: eight watering intervals ranging from every 6 hours to once per week
How to Use - Basic Installation
  • Connect the timers' swivel female hose thread to the faucet by turning the swivel adapter clockwise onto the faucets' male hose threads.
  • If the timer is installed with a drip irrigation system, make sure to add a 25 or 30 PSI pressure regulator to lower the pressure to the drip system, then install a 150 or higher mesh screen filter to protect the drip system, following with a swivel adapter to the drip tubing. After the timer has been programmed, open the faucet on and test the timer by turning pressing the interval dial to MAN and pressing the ENTER button. Review the instruction manual included with the unit for complete programming and installation details.

Browse for more products in the same category as this item:

Lawn Irrigation > Controllers & Timers > Battery & Solar Powered Controllers > Dig Battery Operated Controllers
Lawn Irrigation > Hose & Sprayers > Hose End Timers
DIG Corp
Brand > DIG
Indoor / Outdoor > Outdoor
Power Source > Battery Operated
Design > Fixed
Number of Stations > 1 Station
Shopper Approved | Real Reviews By Customers Like You!