IMPORTANT: Turn off power before installing or removing connector. Product to be used in accordance with local and national codes.
- Strip wire 5/16" (7.9mm). Strip #16 and smaller stranded wire 3/8" (9.5mm).
- Pre-twisting unnecessary. Hold stripped wires together with ends even.
- Push wires into connector and screw on untl tight. Fig. 1
- Insert the splice to the bottom of the sealant filled tube. Fig. 2
- Position wires into wire channels. Fig. 3
- Wipe any sealant around opening and conductors and close lid. Fig. 4
To be sold only with installation instructions.