Features / Benefits

• 1 in. MPT x Barb Valve without Flow Control
• Double-filtered pilot-flow design for maximum reliability.
• Balanced-pressure diaphragm for long life.
  
• External bleed to manually flush system of dirt and debris during installation and system start-up.
  
• Internal bleed for spray-free manual operation.
  
• Energy-efficient, low-power encapsulated solenoid with captured plunger and 90-mesh (200 micron) solenoid filter.
  
• Buna-N diaphragm with self-cleaning 90 mesh (200 micron) pilot water filter and captive spring.
  
• Operates in low-flow and Xerigation� applications when the RBY filter is installed upstream.
  
• 1.25" (3,2 cm) stainless steel phillips head screws.
  
• Accepts latching solenoid for use with Rain Bird battery-operated controllers.
  
• Five-year trade warranty.
• One solenoid handle per order

Manuals and Literature

Specifications

• Pressure: 15 to 150 psi
  
• 075-DV Non-Flow Control Model: 0.2 to 22 GPM. For flows below 3 GPM or any Xerigation application, use a 200 mesh filter installed upstream.
  
• 100-DV Non-Flow Control Model: 0.2 to 40 gpm . For flows below 3 gpm or any Xerigation application, use a 200 mesh filter installed upstream.
  
• 100-DVF Flow Control Model: 0.2 to 40 gpm ; For flows below 3 gpm or any Xerigation application, use a 200 mesh filter installed upstream.
  
• Temperature: Up to 110� F (43� C)
  
• Ambient air temperature: Up to 125� F (52� C)
  
• 24 VAC 50/60 Hz (cycles per second) solenoid power requirement:
  
• 0.30 A (7.2 VA) inrush current; 0.23 A (5.5 VA) holding current
  
• Solenoid coil resistance: 38 Ohms

Dimensions

• Height: 4-1/2"
• Width: 3-1/3"
• Length: 5-3/4"