Toro 570Z-4P-PRX 4 in. Pop-Up Sprinkler Body
Toro® 570Z Series spray heads provide everything needed for residential and commercial contractors to satisfy
all installation and retrofit requirements. In combination with Toro spray and rotating nozzles, 570Z Series spray
heads can be configured in hundreds of combinations and present an unparalleled range of flexibility. Available
in 2”, 3”, 4”, 6” and 12” models with both bottom and side inlet thread options, Toro 570Z Series spray heads
are further available with patented in-stem X-Flow® Technology and Pressure Regulating water-saving features.
Trusted for over 25 years, Toro’s 570Z Series spray heads are the ideal choice.
Features and Benefits
Zero Flush Wiper Seal
The elimination of flushing on pop-up allows for more sprinklers to be installed per zone.
Patented X-Flow® Technology
The X-Flow in-stem flow shut-off device is built into the riser and restricts water loss by 99% should the nozzle be removed or damaged. The exclusive X-Flow device greatly reduces water waste, landscape erosion, and wet hardscape safety concerns.Furthermore, X-Flow allows for ‘dry’ nozzle and filter replacement or system maintenance while the system is running.
One-Piece Check Valve
Pre-installed from the factory or easily installed in the field, Toro’s one-piece check valve prevents low-head drainage on elevation changes of up to 10 feet.
Ratcheting Riser
Quick and precise arc adjustment on all pop-up models.
- Corrosion-resistant stainless steel retraction spring
- All models shipped with installed flush plug
Specifications
- Operational
- Radius: 2 feet to 26 feet
- Operating pressure range:
20-75 psi (15-75 psi for Low
Pressure models)
- Recommended operating
pressure for spray nozzles:
30 psi
- Recommended operating
pressure for rotating nozzles:
40-50 psi
- Flow rate: 0.5 – 4.5 gpm

Manuals and Literature