Upgraded Winter Kit - Kit Includes
- FE765-100 1" PVB Backflow Preventer
- PC-R100 1" Ratcheting Pipe Cutter
- 905ECO-010 8 oz. 905ECO Medium PVC Cement
- 429-010 (2) 1" Slip Coupling
- TC138ASM 1" Seam-Seal Pipe Insulation 6'
- 86080 Pipe Wrap Tape (100')
WARNING! Irrigation systems supplied by domestic or private potable water systems are considered to be a potential pollution hazard to the water supply. These systems must include protection to prevent possible backflow of irrigation water into the potable water supply.
Federal law requires a proper backflow device to be installed on any watering system to prevent contamination of the supply; whether it be pump or city water. Check your local water authority for installation requirements & codes. In many rural areas; specific requirements for landscape irrigation systems may not be covered in local plumbing codes and/or enforcement may be limited. HOWEVER...limitation in local authority does not alter the basic requirement for protection of the potable water supply.
Manuals and Literature
Weld-On® 905ECO 8 oz.
Weld-On® 905ECO™ is the first environmentally responsible cement in the industry that has significantly less solvent emissions and reduced odorous fumes than the current solvent cements in the market — resulting in an improved workplace environment for pipe installers.
The 905ECO is a blue, low VOC, medium bodied, fast setting, high strength PVC solvent cement for all classes and schedules of PVC pipe and fittings through 6″ (160 mm) diameter interference fit, including Sch. 80 to 4″ (110 mm).
This PVC solvent cement is certified by Green Seal™ for Environmental Innovation for effective performance, reduced health hazards, and use with potable water.