 |
 |
 |
|
Premier Brass Nozzles
B Series (Formerly 5500 Series) |
Milled brass design provides best available uniform precipitation for water, material and labor savings in a professional design. Arcs and angles for any landscape requirement. Reinforced border spraying combines with an extremely flat slope of distribution to eliminate the requirement for “head-to-head” coverage. B Series nozzles provide a minimum of .25" per hour precipitation at one foot from listed radius.
|
- These precision brass nozzles are easily discernable; even from a distance; by their unique and attractive water pattern.
- Mill cut part circle nozzles dramatically enhance performance offering two separate layers of water at different velocities; providing the ultimate in pattern uniformity and water conservation.
- Optimal operational pressure is rated at 20 psi; (1.4 bar); substantially lower than other designs that require over pressurization to improve pattern performance.
- Small uniform water droplets generated by the nozzle fall closer to the sprinkler providing an exceptionally consistent pattern and eliminate the need for conventional "head to head" spacing.
- Industry standard threads allow these extended performance nozzles to be installed on most competitive manufactures of spray heads providing a quick and easy upgrade to existing systems.
- Large inlet porting on B20 - B24 nozzles allows more debris to pass through it offering superior contamination resistance in dirty water or reclaimed applications.
- Single port brass nozzles can be easily cleaned with out risk of permanent damage and in many cases with out removing the nozzle from the head.
- These nozzles provide the widest selection of any other matched precipitation family on the market today. 80 nozzles are available; offering seamless spacing transitions from 3 ft to 20 foot and flows ranging from 0.3 GPM to 7.5 GPM
|
 |
- B Series nozzles fi t LX sprayheads, LXS, 72 and 73 shrub adapters, as well as all industry standard male thread risers
- B3 nozzles are compatible with most micro-irrigation application rates
- Many designers derate recommended spacing for climate and wind. Listed radius is determined by ASAE industry standard measurement of .01" per hour.
- Precipitation: 1.2" per hour (25 mm per hour) for full circle / 20 psi (1,4 bar) at maximum triangular spacing
- B Series is identical to former 5500 Series. This is a name change for easier identification.
Example: B15H = 5515-18
|
|
Weathermatic
B Series Brass Nozzles
30° and Low Angle 15° Trajectory / Matched Precipitation
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Radius |
Flow |
Radius |
Flow |
Radius |
Flow |
Radius |
Flow |
Radius |
Flow |
Radius |
Flow |
Radius |
Flow |
|
PSI |
ft. |
GPM |
ft. |
GPM |
ft. |
GPM |
ft. |
GPM |
ft. |
GPM |
ft. |
GPM |
ft. |
GPM |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
20 |
5' |
0.3 |
8' |
0.3 |
9' |
0.5 |
11' |
0.7 |
12' |
1.0 |
13' |
1.2 |
16' |
1.8 |
25 |
6' |
0.3 |
8' |
0.4 |
9' |
0.6 |
12' |
0.8 |
13' |
1.1 |
14' |
1.4 |
17' |
1.9 |
|
|
0.3 |
9' |
0.4 |
11' |
0.7 |
12' |
0.9 |
13' |
1.2 |
15 |
1.5 |
18' |
2.1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
20 |
5' |
0.3 |
8' |
0.6 |
9' |
1.0 |
11' |
1.4 |
12' |
2.0 |
13' |
2.4 |
16' |
3.3 |
25 |
6' |
0.3 |
8' |
0.7 |
9' |
1.1 |
12' |
1.6 |
13' |
2.3 |
14' |
2.7 |
17' |
3.5 |
|
|
0.3 |
9' |
0.7 |
11' |
1.2 |
12' |
1.8 |
13' |
2.5 |
15 |
2.9 |
18' |
4.0 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
20 |
|
|
|
|
9' |
1.7 |
11' |
2.4 |
12' |
3.4 |
13' |
4.2 |
16' |
6.2 |
25 |
|
|
|
|
9' |
1.9 |
12' |
2.7 |
13' |
3.8 |
14' |
4.8 |
17' |
6.8 |
|
|
|
|
|
11' |
2.1 |
12' |
3.0 |
13' |
4.2 |
15 |
5.3 |
18' |
7.5 |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
 |
|
|
|
SHOP ALL 
