Blazing Products BLZ1429 Clampless Poly Fitting
Blazing Fast Fittings require no tools, clamps, or other materials. Slips into the pipe quickly and easily. Patented lock ring technology slides back to lock the fittings into place. Double O-Ring seal prevents leaks and provides a secure fit. Tested in the field by contractors for over a year, Blazing Fast Fittings are ready for your next installation.
- Eco-Friendly: Blazing Fast Fittings are made of high impact ABS and contain no metal or chloride like other fittings on the market, making them the most eco-friendly fitting.
- Testing: Tested to pressures over 400 PSI and put through vigorous on/off cycling in excess of 250,000 cycles, Blazing Fast Fittings will last longer than the life of the irrigation system. Over 3000 Blazing Fast Fittings have been installed over the last year by select contractors around the US.
- Blazing Products can not warranty use of Blazing Fast Fittings used on main lines unless a master valve is used.
- DO NOT use on Main Lines without a master valve. Blazing Fast Fittings are not for use in any application under constant pressure.
- DO NOT use Pipe Dope on Blazing Fast Fittings as it may cause stress cracking or deterioration of the fitting. Blazing Products only recommends Teflon tape on threaded connections.
- DO NOT use torches to warm the pipe when using Blazing Fast Fittings. Heating the pipe can cause irregularities in the pipe and can cause brittleness over time.
- DO NOT use Blazing Fast Fittings in conjunction with compressed air or gasses.
- DO NOT use grease, oil, or solvent to lubricate Blazing Fast Fittings.
- Blazing Fast Fittings slide into the pipe so easily, using torches to soften the pipe is a thing of the past. Blazing Products does not recommend the use of torches when using the Blazing Fast Fittings as it can cause irregularities in the pipe and cause brittleness over time.
- For use on 1 in. 80# or 100# NSF polyethylene pipe
- Over 400 PSI without a leak. Pipe will burst first.
- Withstands repeated freeze/thaw cycles and ground shift and sheering
- Made of high grade ABS material
- Reuseable if ALL O-Rings and Lock Rings are replaced
- Tee Dimensions:
- Outer Diameter: 26.42 mm (1.04)
- Interior Diameter: 19.43 mm (.765)
- Length: 116 mm (4.567)
- End to Pipe Stops: 57.65 mm (2.27)