I75-964 3/4" in. Brass Full Circle Impact Sprinkler with 9-64 Nozzle
Impact sprinklers are available from a variety of manufacturers for any application. Sprinkler Warehouse offers impact sprinkler heads designed from the most durable materials, including brass, stainless steel, and plastic. Impact sprinklers are carried in full or partial-circle models, and will keep your landscape green and beautiful year round. Riser-mounted impact sprinkler heads are the perfect option for slopes, large areas, and above-grade applications.
- 25° trajectory
- Stainless steel parts
- Opposing nozzle ports
- Full circle coverage
- Highest point of stream is 8' above nozzle
- Standard single main nozzle with opposing side plugged
- Male inlet, National Pipe Thread (NPT).
- Solid brass nozzle.
- Pressure - 30 to 80 PSI
- GPM - 2.60 to 22.10
- Spacing - 40' to 70' radius
over 2 years ago
The Aqualine 175-964 has a 9/64 primary nozzle and a plug in the secondary nozzle port.
Based on this you will expect the following, based on PSI a the nozzle:
30 psi - 3.1 GPM
40 psi - 3.6 GPM
50 psi - 4.1 GPM
60 psi - 4.4 GPM
70 psi - 4.8 GPM
80 psi - 5.1 GPM
What is the radius at 25 PSI?
For the price, the sprinklers are great options - substantially better than anything you will find at hardware stores. I installed them two years ago and have not touched them since.
I would recommend installing a ball valve below each sprinkler if you can. This allows you to control the moisture a little better in case you have areas that don't drain as well as other areas.
I need 60 of these, do you have in stock?
Robert Liptrap, Agromillora - CA
We found other products you might like!