PUT PRDIG SW9000 3/4" in. FHT Hose Bib Drip Connection Kit (.700 OD)
This Hose Bib Kit includes a backflow device, "Y" filter with 155 mesh polyester screen, a 30 PSI preset pressure regulator and a 3/4" in. FHT swivel adapter. This kit can be connected to 1/2" in. drip line or poly pipe for a variety of landscape irrigation applications
Hose End Backflow Preventer
- Prevents dirty water from backwashing into your potable water system
- Swivel design for easy connection
- Inlet x Outlet: 3/4 in. FHT x 3/4 in. MHT
- Low friction loss
- Screens have excellent reistance to most common chemicals
- Easy maintenance: screen can be extracted from filter for easy cleaning
- Non-corrosive materials
- Interchangeable screen and disc elements with a wide range of filtration degrees
- 3/4" in. FHT x MNPT with washer
- Regulator set to 30 PSI.
- Reliable control regardless of fluctuation in upstream pressure or flow
- Withstands severe water hammer
- High impact plastic
- Color coded
- UV resistant
- Secure and easy installation without glues or clamps
There were two problems I had with the installation.
1. There was no washer included on the connection between the pressure regulator and the adapter connecting to it upstream. This caused it to leak profusely. Both kits were missing the washer. I added washers to both of them and that took care of the problem.
2.The other problem I ran into, was not a problem with the kit, but just something to be aware of, was that I was using .630 OD tubing to connect to the compression swivel. The compression swivel only supports .700 OD tubing, which resulting in a leak. SprinklerWarehouse does not carry a compression swivel for .630 OD tubing. I was able to get a proper sized compression swivel at Ace Hardware.
1 year ago