Order today, ship today!

Left for Same-Day Shipping

Free shipping over $125

EZ-Flo Replacement Tubing Assembly Kit | TUB-ASSMB-CX

In stock
SKU
TUB-ASSMB-CX
Free Shipping on Orders over $125
Sale Price $17.48
Our Price $27.00
You Save 35%

EZ-FLO TUB-ASSMB-CX Replacement Tubing Assembly Kit:

EZ-FLO Main Line Systems attach directly to your in-ground sprinkler and/or drip irrigation system. Every time you use your irrigation system, EZ-FLO releases small, precision doses of water soluble or liquid non-hazardous fertilizers into the water stream. One system will feed through both sprinkler and drip irrigation zones without the need to make any adjustments or nozzle changes to compensate for water flow or water pressure. Main Line Systems have been designed to connect directly to your irrigation system after an approved backflow prevention device. They are designed to withstand constant static water pressure present in your irrigation system. These units are constructed of heavy-walled, UV-Resistant PVC and have no moving parts making them very reliable, dependable and maintenance-free.

Features and Benefits

  • EZ-FLO Bypass, Jacos, Tubing, Shut Off Valves and Washers
  • The system can be installed in minutes
Brand:
EZ-Flo
Weight:
0.3000
Average Rating:
3 Stars , 2 Stars , 1 Star
3.7 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
1
0
1
0
essential for a pressurized system
I installed a pressurized ezFlow tank on my system in the greenhouse. When I had to replace the tank, I didn't have the shut off valves in the connection tubes, so I had to close the water off to the greenhouse just to change the tank. These valves will prevent that in the future. Also, I can isolate the tank when it is empty or need refill.
March 18, 2014
Replacement Parts
My original assembly was an older design and leaky. Sometimes the small hoses would come off the Nuts resulting in a mess. I could have replaced just the Nuts but decided to go with a new assembly instead.

This newer design has better shut off values on each line which allow complete control of the fertilizing fluid. All connections are tight without any leakage.

Yes I would recommend this new assembly to others.
July 22, 2018
Purchased
8 months ago
leaking connector clamps
looks good and same as the original except the small clamps do not seal the connections to the as they leak,
August 21, 2018
Purchased
7 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 3 questions Browse 3 questions and 12 answers
Why did you choose this?
SprinklerWarehouse.com Store
replacement
K J on Nov 17, 2018
Needed the parts for an older system.
M I on Jul 23, 2018
replacement
K J on Nov 17, 2018
NEED COLLETS
W F on Aug 3, 2018
Needed the parts for an older system.
M I on Jul 23, 2018
My original part cracked and leaked badly.
L E on Jun 28, 2018
needed a replacement for my current assembly
Larry J on Jun 15, 2018
Very short life span even when protected from the elements.
Bill P on Apr 22, 2018
the tube broke off inside the valve.
The clear tubing has broken on 3 of the 1 1/2 gal injectors I have installed.
Apparently the clear tubing isn't UV protected.
P L on Mar 14, 2018
the Co here didn't have the part.
Hale W on Aug 17, 2017
replacement parts
C R on Jun 21, 2017
Replacement for weather worn hoses
Charles T on Mar 11, 2017
Tubing fails frequently. Easier to replace the entire assembly
P L on Feb 5, 2017
NEED COLLETS
W F on Aug 3, 2018
My original part cracked and leaked badly.
L E on Jun 28, 2018
i need to replace the 2 grey shut off valves not the hole thing .

? can i buy just the valves

tom moore
[email protected]
thomas m on Jan 30, 2011
BEST ANSWER: We do not have them available separately.
Where can I get the small plastic clamp for the 1/4" tubes in teh EZ-Flow 2.5 gallon system? These do NOT come with replacemant tubes. and not listed in parts list.
William B on Apr 10, 2013