Order today, ship today!

Left for Same-Day Shipping

Free shipping over $125

Hunter WR-CLIK Wireless Sprinkler Rain Sensor

In stock
SKU
WR-CLIK
Free Shipping on Orders over $125
Sale Price $61.98
Our Price $72.91
You Save 15%

Hunter WR-CLIK Wireless

Sprinkler Rain Sensor

Most rain-sensing devices work by accumulating a set amount of rainfall before a switch is activated that interrupts the circuit from the controller and shuts off the system. In that accumulation time, the system will unnecessarily continue to water. This can look especially bad for conservation-conscious municipalities, businesses, and residences. With built-in Quick Response technology, the Hunter Rain-Clik and Wireless Rain-Clik can command a controller to shut off right when it starts to rain. The Rain-Clik can be mounted on an eave or any flat vertical surface like a wall or fence. A gutter mount is also available that allows for easy installation of the Rain-Clik on the edge of a gutter.

Hunter WR-Clik Wireless

Product Details

  • Quick Response feature shuts the system off as soon as it starts raining
  • Maintenance-free design with 10-year battery life for Wireless Rain-Clik
  • Adjustable vent ring allows for setting of reset delay
  • Rugged polycarbonate housing and metal extension arm
  • Rain-Clik includes 25' of 20 AWG sheathed, two-conductor, UL-approved wire
  • Wireless unit available with 800 ft. range from wireless sensor to receiver
  • Warranty period: 5 years (10 year battery warranty for wireless model)
  • Compatible with most controllers
  • Wiring: "normally open" or "normally closed"
  • Time to turn off irrigation system: 2 to 5 minutes approx. for Quick Response
  • Time to reset Quick Response: 4 hours approx. under dry, sunny conditions
  • Time to reset when fully wet: 3 days approx. under dry, sunny conditions
  • UL listed, CUL (CSA), CE
  • Switch rating: 24 VAC, 3 A
  • Freeze sensor shuts system off when temperatures fall below 37 degrees F (Rain/Freeze-Clik model)
  • System operating frequency: 433 MHz
  • UL listed, FCC approved, suitable for use in Australia, CUL (CSA), CE
  • Communication range up to 800 ft. line of sight (Wireless model)
  • Receiver input power: 24 VAC (from controller)
Brand:
Hunter
Weight:
0.9500
Sensor Material:
Plastic
Type:
Rain Sensor
Material:
Plastic
Sensor Connection:
Wireless
Rain:
Yes
Average Rating:
5 Stars
5.0 / 5.0
21 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
20
1
0
0
0
Easy installation
Quick delivery and easy to install. Was a replacement to the original one installed.
July 10, 2018
Purchased
9 months ago
Great insurance policy.
It took just minutes to install, works as described, best little investment.
July 10, 2018
Purchased
9 months ago
Hunter WR-CLIK Wireless Sprinkler Rain Sensor
Great Product! Easy to setup and install. Always a great experience when shopping at Sprinkler Warehouse.
July 31, 2017
Purchased
1 year ago
Just what I needed. Worked perfect. Took me 15 minutes to install.
June 17, 2018
Purchased
9 months ago
Perfect solution
Great sensor that is easy to set up and love that it has no wires to run outside. Triggers as expected and dries as adjusted. Replaced a wired unit with this and will never use a wired unit again. Good job Hunter.
August 1, 2017
Purchased
1 year ago
Works great
I recommend the Hunter rain sensor, it was easy to install and has performed perfectly for over a year. Stops the sprinklers when there is rain and turns the system back on when the sensor dries.
June 6, 2017
Purchased
over 2 years ago
Very easy to install. Works fine when raining. Found out you can control when sprinklers come back on by placement of gage. Place in sun drys out faster, place in shade drys out slower.
August 26, 2017
Purchased
1 year ago
Seems to be good so far. I've installed at least 12 of these this winter on systems I maintain. I have them set to medium dry time to start out. We'll see how they work in the spring.
January 1, 2018
Purchased
1 year ago
Hunter WR-CLIK Wireless Sprinkler Rain Sensor
Excellent service. Product shipped promptly, packaged well, and operates exactly as expected.
October 3, 2018
Purchased
6 months ago
Works great
I bought this item for a great price on Sprinkler warehouse. It was easy to set up and was put to work a few days after installing. It is working well and i have even used the bypass function which works well. So far so good!
September 11, 2018
Purchased
7 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 29 questions Browse 29 questions and 121 answers
Why did you choose this?
SprinklerWarehouse.com Store
Hunter is commercial grade for residential application
Bryan A on Dec 31, 2018
5 star rating! Pricing good! Merchandise availability! Special free shipping offer!
Z M on Nov 23, 2018
Hunter is commercial grade for residential application
Bryan A on Dec 31, 2018
They are replacement items for a Hunter system.
E N on Dec 5, 2018
5 star rating! Pricing good! Merchandise availability! Special free shipping offer!
Z M on Nov 23, 2018
ive installed 1000's of these
william s on Sep 29, 2018
recommended by a friend
R O on Sep 18, 2018
to avoid having the system go off when its raining
D A on Sep 9, 2018
cheaper than other retailers and fast response for the question.
Frank L on Aug 22, 2018
Currently Have Hunter System and it's wireless for east install.
Stephen K on Aug 7, 2018
I need this part
M A on Jul 25, 2018
My original Hunter WRC sensor is still under warranty, but the battery on a replacement unit would not last much longer. (It has a 10 year warranty.)
Instead, I decided to purchase the replacement model (transmitter and receiver).
D I on Jul 23, 2018
NEED a Wireless application, Pleased with other Hunter Products
Paul P on Jul 15, 2018
Wireless is easier to install and more flexible as to location
D W on Jul 11, 2018
Repacing older moder not working.
Betty B on Jun 27, 2018
Had one at my old house and it worked great...
Michael F on Jun 25, 2018
Neighbor recommended it.
D O on Jun 25, 2018
replacement part
E D on Jun 23, 2018
Replace my 10yr old similar Hunter sensor. Works great !
P E on May 28, 2018
DO NOT WANT TO IRRIGATE LAWN WHEN IT'S RAINING. IT'S A MATTER OF WATER CONSERVATION
Rolly O on May 22, 2018
Needed to replace an older Hunter sensor whose battery had died.
Sam H on May 17, 2018
I have this exact model which stopped working. It is supposed to be a 5 year warranty but it only lasted ABOUT 4 years and by now I don't have any receipts. The professional contractor that installed it certainly doesn't have any of that info now. So Iam hoping that this replacement will work!
N O on Apr 22, 2018
dont like turning off the sprinkler manually if it rains
Matthew K on Apr 15, 2018
My current one is broken and needs to be replaced
M G on Oct 5, 2017
Very effective, has never left me wondering if this unit functions as it is supposed to. Ease of install with wireless, better sensor placement than wired
E L on Sep 6, 2017
The battery on my original transmitter finally died. I need to replace the unit
DENNIS W on Aug 2, 2017
no worry sprinkler shut off
M E on Jul 29, 2017
replacement part
chuck m on Jun 25, 2017
Straightforward features. Value pricing.
D O on Jun 22, 2017
Replacement
S U on Jun 6, 2017
Moved to new house and had this convenient tool at old house
B E on May 3, 2017
Customer needed a new sensor
R O on Apr 3, 2017
great product trouble free
Larry A on Mar 1, 2017
To me, the best basic wireless sensor for the price from SW. I don't use the rain sensor terminals.
Anthony P on Dec 26, 2016
To replace exsisting one
Brian T on May 8, 2012
They are replacement items for a Hunter system.
E N on Dec 5, 2018
ive installed 1000's of these
william s on Sep 29, 2018
I have a sprinkler system with rain sensor. The outside sensor (Hunter WRC) however seems to have failed. Will a replacement sensor still work OK with my current the receiver attahced to the current sprinkler control panel?
Cary C on May 8, 2012
BEST ANSWER: Cary,
Sorry for the late response. According to the manual I received when I bought my Wireless Rain Click Sensor, there is a process for resetting the communication between a receiver and a new transmitter. The pamphlet gave good instructions for doing this so it should be no problem.
Will this work with a controller that is mounted in my basement?
Joanie B on Jul 12, 2012
BEST ANSWER: Probably yes but essentially you're asking how far a wireless connection will work. It depends on the distance and the number of obstacles (walls, wall material, etc.) between the transmitter in the rain sensor and the receiver in the controller. There is no definitive answer other than trying it out. Note that if you don’t force a sync procedure (this is all in the instructions), it can take maybe up to an hour for the controller to recognize the sensor. So the easy procedure, which works fine, may take some patience but the results are easily known by the state of the controller’s light.
does this item contain the transmitter and the receiver?
Robert B on May 26, 2016
BEST ANSWER: Yes, it contains both. I only needed the weathered transmitter, but I believe someone else pointed out that if you have older technology you need both so they can communicate.
Is the outdoor sensor sold separately? That's all I need.
Greg S on Aug 16, 2013
BEST ANSWER: Greg,

I was of the same need, but didn't see the WR-CLIK-TR sold separately through sprinklerwarehouse.com. I bought a whole new kit since mine was over 7 years old. I did find them via a web search. One place is: sprinklersupplystore. They run around $40.

Hope this helps.
I have sandy soil where I am and this senor does not dry out quick enough to be useful for me. Is there anyway to decrease the dry-out time? I need it to dry-out in 12 hours or so.
A shopper on Jun 6, 2017
BEST ANSWER: Two things can be done. First make sure the rain sensor is installed in a sunny location and secondly there is a dial that when you turn it right or left will either open or close the vertical openings to the sensor allowing it to dry out faster or slower based on the type of soil you have. You need to have the openings totally open/exposed to dry sensor quickly.
What sensor would work best with a pro c controller?
Mark F on Apr 25, 2017
BEST ANSWER: A Hunter WR-CLK Wireless rain sensor. It's simple and easy to install. You also have the convenience of installing it up to 800' from the receiver!
does this sensor come with a gutter mount?
dan p on Jul 2, 2014
BEST ANSWER: No, but I believe one can be purchased. If you are replacing an existing sensor you can most likely utilize the existing gutter mount. I don't recommend screwing sensor into gutter as I have seen more than once as this will cause your gutter to leak through the screw holes.
will it work with an orbit controller?
brad o on Apr 22, 2014
BEST ANSWER: I installed the sensor with a Hunter control box which was no problem. Not familiar with the orbit controller but we're talking about connnecting a couple of wires into the control box so I would not think the fact that it is not the same brand would prevent you from using it.
Can i purchase the sensor only?
A shopper on Apr 25, 2015
BEST ANSWER: Yes, if you have a Hunter clock (or others compatible to it) you can get a Hunter WR-CLIK Wireless Sprinkler Rain Sensor and easily install it in five minutes. Mine works just fine and I didn't have to spend $75 on a service call.
this one for 1 set of 2 only$53.88 ?
tri n on Jul 1, 2017
BEST ANSWER: Yes, this is a good deal and it includes both components for rain sensing....the wired receiver and the sensor/transmitter. They are identical to mine. I haven't installed them yet but am confident they will fix my problem.
I have sandy soil where I am and this senor does not dry out quick enough to be useful for me. Is there anyway to decrease the dry-out time? I need it to dry-out in 12 hours or so.
Dick W on Jun 6, 2017
BEST ANSWER: Have you tried opening the sensor window. There is a setting that will allow more air to get inside the chamber and allow it to dry out quicker. I have sandy soil and the sensor does not take more than 24 hours to dry out. It rained yesterday and today my sprinklers came on.
is it possible to buy only the sensor and not the receiving unit?
A shopper on May 27, 2013
BEST ANSWER: Yes it is possible. However, read the note in the sensor listing. There is a compatability issue with receivers built before, I believe, 2005.
Can one remote sensor connect to more then one controller if I buy a second wireless receiver?
A shopper on Mar 18, 2013
BEST ANSWER: That should be no problem since there is no signal degradation due to multiple receivers. You would just have to ensure both controllers are within range of the transmitter. Also, you would have to ensure all parts (transmitters/receivers) are using the same channel.
Can I buy just the rain sensor for the Hunter WR-clic? The box mounted to my sprinkler system is still good.
A shopper on Dec 19, 2014
BEST ANSWER: I did that and it worked fine. You just have to "connect" it by pushing in the button on the sensor and then within a certain timeframe power up the receiver.
Can it work on a Toro ECXTRA?
John S on May 2, 2014
BEST ANSWER: I looked up the directions for the Toro version of this Hunter rain sensor and they both hook up exactly the same. The rain sensor connects between the common connection for the control valves and the sprinkler controller. The sensor is 24VAC and so is the Toro Ecxtra. The instructions that come with the Hunter Rain-Clik Sensor are easy to understand and follow.

Richard Danto
does this unit use a battery?
A shopper on Aug 8, 2012
BEST ANSWER: The rain sensor has a battery. Not the kind of battery you can replace. The battery lasts for about 5 years i believe.
Will it work with Hunter X-CORE controller?
Frank L on Aug 20, 2018
BEST ANSWER: Yes Rain sensors work with any model or type of electric controller
CAN I USE 1 TRANSMITTER WITH 2 CONTROLLERS?
Martin S on Oct 11, 2016
BEST ANSWER: I contacted Hunter with the same question regarding my system and the answer was yes and they also provided the necessary procedure to do so. Since Hunter was extremely prompt and helpfull, my suggestion is that individuals contract Hunter regarding their specific system.
My sensor is not shutting off even after a 2 1/2 inch rainfall. What could be the problem?
Betty B on Jun 26, 2018
Can I replace the wrc sensor with a wrcf sensor?
A shopper on Jun 22, 2018
Does the remote have a dry contact?
Mark G on Aug 11, 2017
Is the hunter rain station compatable with the new Hydrawise wireless systems?
Gary M on Dec 18, 2016
My existing sprinkler times has 120 volt connectors. Is there a transformer recommendation?
Joe B on May 12, 2016
Can I just order the sensor/transmitter without the receiver?
George K on Jun 24, 2014
I have a hunter system with a pump and the pump come on on all the station but no water come out?
tanyanla s on Jul 21, 2012
I already have a Hunter Pro C, and a wireless sensor that is not working. Can I buy only the remote rain collector/sender?
Herman V on Mar 25, 2012

We found other products you might like!

  1. on sale $68.98
    $112.42
    you save 39%
    Sku:WRF-CLIK
    +