Order today, ship today!

Left for Same-Day Shipping

Free Shipping Offer to Orders over $149

Hunter I-20 Stainless Steel Rotor with Check Valve 4" | I20-04-SS

In stock
SKU
I20-04-SS
Free Shipping on Orders over $149
Sale Price $18.12
Our Price $23.21
You Save 22%

Hunter I20-04-SS 4 in. Pop-Up Stainless Steel Adjustable Arc Rotor

The PGP Ultra takes the foundation of the best-selling PGP Rotor and raises the bar with a variety of new features developed over three decades of research, customer feedback, and lab testing. Among the most notable improvements of the PGP Ultra is its non-strippable drive and automatic arc return. These two features work to allow the turret to be turned without causing damage, and return the turret to its original arc regardless of where it is turned. Other advanced features include 34 nozzle options with several radius choices, and a headed slot and set screw. The diversity of the PGP Ultra offers system installers an array of efficient options on any site.

Features / Benefits

  • Models: 4"
  • Arc setting: 50 to 360 degrees
  • Factory installed rubber cover
  • Through-the-top arc adjustment
  • Quick check arc mechanism
  • Water lubricated gear-drive
  • Includes: set of 12 nozzles (8 standard and 4 low angle). 1 adjustment tool per order, 1 set instructions

Operating Range

  • Radius: 17' to 46'
  • Flow Rate: 0.36 to 14.8 GPM
  • Recommended pressure range: 25 to 70 PSI
  • Operating pressure range: 20 to 100 PSI
  • Precipitation rates: 0.4 in/hr approx.
  • Nozzle trajectory: Std = 25 degrees, Low angle = 13 degrees

Dimensions

  • Overall Height: 7-1/8"
  • Pop-up Height: 4"
  • Exposed Diameter: 1-3/4"
  • Inlet Size: 3/4" female NPT

Manuals and Literature

Brochure Charts Specification
Weight:
0.8000
Product Tag:
Top of the Line
Non-Potable:
Potable
Type:
Rotor
Series:
I20
Flow Rate:
0.36 - 14.8 GPM
Spray Pattern:
50 - 360
Spray Radius (ft.):
17 - 46
Check Valve SAM:
Check Valve
Application:
Residential And Commercial
Pressure Range (PSI):
25-70
Body Height:
7-1/8
Inlet Size:
3/4
Warranty:
5 Years
Brand:
Hunter
Product Type:
Rotor
Pop-Up Height:
4"
Check Valve:
Check Valve
Advance Features:
Check Valve, Flow Shut-Off
Riser Material:
Stainless Steel
Radius (ft.):
17' - 46'
Pattern:
Part Circle Adjustable (50 - 360)
Average Rating:
4 Stars , 3 Stars , 2 Stars , 1 Star
4.6 / 5.0
29 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
23
3
1
0
2
very reliable heads
Have been replacing an old system with a hodgepodge of heads with these and could not be happier. Easy to install and adjust, very durable and reliable.
July 26, 2018
Purchased
1 year ago
Best product at the best price.
Easy to instal/replace. Both arch and radius are easy to adjust provided you have the adjustment tool.
August 14, 2014
Excellent product
Great product and excellent quality. I've replaced all my old plastic heads with these new stainless steel heads. Couldn't be happier.
October 21, 2016
Purchased
over 3 years ago
Great Product
I have been using this sprinkler for around 3 weeks now. It works great and my lawn has never looked better!
August 18, 2017
Purchased
over 2 years ago
Works great, even with the sub par water pressure out of my water spigot I can run 2 at once. Love the number of features, especially the on rotor on/off valve so you can change nozzles without turning the water off
June 30, 2018
Purchased
1 year ago
Outstanding product
The stainless steel provides smooth operation and reliable rise and retraction. Definitely worth the difference in price.
September 21, 2017
Purchased
1 year ago
Sprinkler Heads
Vendor makes it easy to find what you are looking for and the ordering process is easy and straight forward. I've been using these Hunter sprinkler heads for over a decade and they work very well, but due to traffic running over them, and general wear, they do need to be replaced every few years.
September 16, 2018
Purchased
12 months ago
Hunter Stainless Steel Sprinkler Head
I ordered these to replace a broken head. I have had these installed in my irrigation system since 2006. They are extremely rugged and very reliable. Multiple adjustments. Highly recommend.
August 21, 2017
Purchased
over 2 years ago
very good product
Well made. super easy to set spray pattern. very happy with this product
July 5, 2014
Hunter I-20
i ordered these pop-up sprinklers because after 10 years of non-use, the existing Hunter I-20 heads popped up when the system was restored. Therefore, I feel they have shown their superiority.
ii expanded the existing system with the new heads and everything is working perfectly.
August 14, 2018
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 25 questions Browse 25 questions and 124 answers
Why did you choose this?
SprinklerWarehouse.com Store
They work very well.
Rod R on Nov 14, 2018
Check valve and stainless steel option
B O on Oct 31, 2018
They work very well.
Rod R on Nov 14, 2018
New replacement
Jeffrey B on Nov 13, 2018
Check valve and stainless steel option
B O on Oct 31, 2018
Replacement for original 15 year old parts.
D O on Aug 20, 2018
It is what my irrigation system uses.
Wendell S on Aug 14, 2018
for replacement in my lawn
D P on Aug 1, 2018
Quality
B I on Jul 22, 2018
It was the exact replacement of the head the street crew dug up. Have never had a failure in the 15 years of service on any of my hunter heads.
T P on Jul 21, 2018
Always use , easy to replace and easy to adjust
Karen K on Jul 21, 2018
I have used Hunter sprinklers for last 25 years. The best
L L on Jul 17, 2018
great product and stainless steel for durability.
Eric P on Jul 15, 2018
reorder from 722703
D E on Jul 12, 2018
looks cool
KENT V on Jul 11, 2018
For replacement of existing rotors.
John M on Jun 30, 2018
Because I have 30 others in my yard of the same type although I've been having some issues with them popping up by themselves
Steven T on Jun 25, 2018
Works well and doesn't leak.
T P on Jun 19, 2018
Replacement of original sprinkler heads
W E on Jun 19, 2018
for the check valve and shutoff features.
T I on May 29, 2018
Replacing 15-year old Nelson 6000's. Want a sprinkler that will last a long time.
Douglas H on May 28, 2018
Replacing old ones of the same type. Have a long experience with the SS models and they last a long time
D F on May 20, 2018
Reviews of product.
Problems with other companies product.
Tom C on May 9, 2018
Hunter SS heads are the best. They will virtually never break down on their own. They are reliable and last for years.
Elisabeth B on May 2, 2018
like the info on it we meet my needs
Tom F on May 1, 2018
replace some broken ones
M D on Apr 24, 2018
Was told it was a good upgrade from my current PGP rotors.
John T on Apr 18, 2018
Much more durable and reliable than the regular heads
Matthew K on Apr 15, 2018
Existing
James S on Apr 3, 2018
Going to give SS a try
M I on Dec 30, 2017
I am extremely happy with these sprinklers & so far they have performed exceptionally well for me
Robert B on Nov 1, 2017
used before
C L on Oct 19, 2017
Price, cost from my septic supplier company would be $45.00 each.
Larry R on Oct 14, 2017
The price was reasonable and Hunter has a great reputation and it met my needs for coverage
O W on Oct 9, 2017
Matches the rest of my system.
M M on Sep 29, 2017
I've purchased these before and they're worth the extra couple of bucks. Great price from this retailer and fast shipping.
RONALD GRIM O on Sep 24, 2017
Looking to try out a new rotor in possibly upgrading my PGP rotors
Andrew B on Sep 19, 2017
Stronger spring for sandy soil. SS sleeve. Durability.
B L on Sep 18, 2017
Recommendation
C T on Aug 15, 2017
My irrigation system uses these. Very sturdy and reliable
G G on Aug 4, 2017
The retract spring too strong for my application here ?
Brian K on Jul 9, 2017
great reviews and water pressure rating.
C L on Jun 27, 2017
Quality and durability
ROG on Jun 21, 2017
Hunter is reliable
E X on May 29, 2017
Stainless steel model was recommended to me as plastic ones keep breaking
N G on May 21, 2017
I have had Hunter sprinklers for 20 years and never had a problem. Never had to re-adjust them and they are quite.
Bob on Apr 25, 2017
I have one or two like it and like them.
Mr. H on Apr 18, 2017
It's what I needed.
K S on Apr 18, 2017
Better price than competitors
Dmitriy P on Apr 16, 2017
upgrade to meet free shipping target
Robert L on Apr 13, 2017
A little more expensive, but durable. Had them at my last home. Moved into new home - replacing all existing Arc Rotors with these.
Scott E on Apr 11, 2017
We are replacing some old Orbitz sprinklers. These ones work great!
Patricia C on Apr 10, 2017
New replacement
Jeffrey B on Nov 13, 2018
Replacement for original 15 year old parts.
D O on Aug 20, 2018
It's advertised as a 4 in. Pop-up Rotor, but is the pop-up component itself only 4 inches?, or does the entire unit measure 4" prior to the pop up actually extending? I need to know how these are measured in order to order a product that matches the rotor I need to replace.
A shopper on Apr 22, 2013
hi, I currently have Hunter PGP 4" heads/rotors.. What is a good replacement but better quality? The PGP ultra? OR the I20? Looking for something that will last longer. thanks
dan g on Oct 17, 2015
BEST ANSWER: I've had 4 I20's installed for over 2 years, twice a day use, with no issues what so ever. Super easy to adjust. I can't speak for the pgp as I've never used it.
Are there any advantages to the stainless steel sleave other than flashy looks? I need to conserve $ as much as possible but am concerned with cutting down on maintenance and having long lasting reliablility. Thanks for helping me out with your valuable time!
Richard L on Feb 20, 2011
BEST ANSWER: Hi Richard. My name is Mike, and I purchased a bunch of the 120-04-SS rotors last summer to replace failed rotors. I was so impressed, I bought more to replace my remaining heads that had not failed yet. My experience is less than one complete season with these, but so far they are flawless. My hope is that the SS barrel will not "score" from sand like my last brands did, which eventually would not go down when the water went off. That being said, the spring on this model is very strong compared to my last heads, and I doubt that will be a problem with either the plastic or the SS Hunter models. I think its worth the extra 4-5 bucks per head for thr SS. Even if you do the repairs yourself, the constant tinkering with heads gets frustrating when they age. If someone else does your repairs, they would easily pay for themselves. They do look very cool by the way. I am hoping for less maintinence for the money. At the very least, I would put the SS models along roadways, or very sandy drain areas that tend to cause scoing on the barrel, and plastic heads elsewhere. I thought about that when I first ordered them, but liked the SS models so much, I went with them for all my heads.( about 25). I did have one that did not work right coming out of the box, and SW was great in replacing it for me. I have tried several brands in the past, only to be disappointed. These are amazing rotors. Hope this helps you out.. Great sprikler heads! Great service! Mike
I have low city water pressure can I use the i20 stainless steel sprinkler head ?
A shopper on Nov 9, 2014
BEST ANSWER: I have my pressure regulator turned down to 45 psi and they work fine. I'd guess that there is some lower pressure below which the spring would be too strong to allow the head to pop up.
Which hunter I20 6" model has the 180 degree preset and how is it identified?
A shopper on Oct 22, 2014
BEST ANSWER: All Hunter Rotaries come preset at approximately 180 degrees
Can the water pressure be shut off on the I20 SS head?
A shopper on Jun 25, 2014
BEST ANSWER: Apparently this model comes with something called Flo Stop which does allow the water to be shut off at the head, using the small adjusting tool that comes with it. Frankly I just learned if this feature by looking at the product description on S Warehouse. I have never used this feature. I bought this model solely for the added durability of the inside metal cylinder. Hope this helps.
Does the sprinkler nozzle sit at 4” above the ground or sprinkler body..or does the top of the sprinkler, when fully extended sit at 4”” above the ground level, assuming the sprinkler is installed flush with ground level?
Tom Timko on Nov 14, 2018
BEST ANSWER: Install the sprinkler unit flush with the ground and the head will pop up 4 inches. these sprinkler heads are nearly indestructible. I have several that have been run over by my neighbor and they just keep on trucking.
I am considering replacing my Rain Bird Impulse sprinklers with either Rain Bird or Hunter Stainless Steel pop up sprinklers. The Rain Bird has a shutoff switch on top of each sprinkler so an individual head can be turned off while the others are still running. I do not see this feature on the Hunter, is there a switch? Any advice on Hunter over Rain Bird?
Thanks
Bruce
A shopper on Jun 23, 2012
BEST ANSWER: Yes, Hunter has a turn off feature. You are given a "key" that allows you to adjust everything with what the sprinkler head does, which includes turning off the water coming out of the individual head. The sprinkler head will still pop up, but you can turn off the water. All you do is take this "key" and stick it into one of the hole on the top of the head and make all your adjustments from there. I love my Hunters.
DOES THIS SPRINKLER HAVE A CHECK VALVE ?
P A on Jun 12, 2018
BEST ANSWER: Yes all i20’s do. I would recommend check valves absolutely. It keeps the grass and area around the the sprinkler from becoming a muddy mess and reduces overgrowth of the grass right at the sprinkler head.
Do the Hunter I-20 4" Rotors use the same canister as the Hunter PGP and PGP Ultra 4" Rotors? It looks like the I-20 heads can be assembled into the existing PGP plastic canisters in the ground for easy changing / upgrading of leaking heads.
Stephen W on Jul 10, 2014
BEST ANSWER: I tried the same thing and it looks like it will work, but it doesn't. I ended up having to dig out the heads. I can't remember specifically but the top nut piece is different (thicker and taller) and something about the can is too.
is this the same as Hunter I20-04-SSI-20 Ultra?

thanks
Karen
Karen M on May 3, 2012
BEST ANSWER: Yes it is.
The I20-04-SS: I20 is the model, 04 stands for 4 inch rise when it pops out of the ground and the SS stands for Stainless Steel bodies which are worth the extra few dollars.

I've have done business with Sprinklerwarehouse for a number of years. They have been great. And even took care of me when I accidently ordered the wrong height. Still the best price. I usually buy 4 at a time as I'm either replacing plastic bodies that are breaking apart or replacing ones that I broke with the snowblower. Good luck. Hope this helps.
Does the i20-04-ss have a check valve or is that a separate purchase?
A shopper on Apr 13, 2017
BEST ANSWER: Yes it does. All you had to do was click on the Specification page to see that it has "Drain check valve (up to 10' of elevation)"

Hope that helps!
can you buy just the top cap that the lawmower chewed off?
A shopper on Mar 6, 2017
BEST ANSWER: Personally, I have not had any occasion to do this. But, listed under features and benefits, it says the rubber cover is factory installed. My guess is no, based on the factory installed feature....

R.DANIELS
how do yo adjust the the sprinkler head ?
A shopper on Jun 5, 2011
BEST ANSWER: There's two adjustments on two different holes at the top of the sprinkler, using the two different ends of the special tool that comes with it:

1. Adjusting the stream of water and the distance of stream using the metal end of the special tool.

2. Adjusting the radius with the plastic end of the special tool, from 10-degrees to 350-degrees. The sprinkler comes from the factory set at 180-degrees.

Hope this helps. Good luck.
Does the Hunter I-20 4" SS heads have built in check valves in the bottom of the heads? Thanks Mark
A shopper on Jul 18, 2017
BEST ANSWER: Yes, they do have a check valve. Refer to their specs on hunters website for details (I'm not allowed to paste the link)
Wondering whether sprinkler can be used for acid pressure instead of water pressure?
Kenaan on Nov 29, 2016
BEST ANSWER: This sounds like a question for the manufacturer. We have not used the sprinkler for anything other than water.
Is this part eaasy to change in an existing underground irrigation system.?We just need to change the head because I backed over it and cracked a plastic part inside the sprinkler head.
A shopper on Jul 1, 2011
BEST ANSWER: Just dig out around the head a bit...after that...take a pliers or channel lock that fits around the circumference of the body of the head and another one to the very top of the castle shaped bonnet. Turn the bonnet counter clock wise while holding the body stationary with the bottom pliers. the two pliers will be placed so as seem the handles of the two pliers would be coming together. the botom pliers should remain in the same position and only the top pliers should move. It's called bucking. You don't want the body to turn (counter clock wise) for that may loosen the entire head from the pipe threads on the bottom and create a leak. I am presuming you have a replacement cartridge assembly from a new head. this is the simpilist and cost effective way to fix your problem, I will try to attach the installation instructions. If it doesn't work...they are available via the 120 spec page in pdf format. I suggest you just print them out if possible. Take care Dennis
Does anybody know what is the lowest water pressure that the Hunter 120-04-SS will operate? I like the stainless steel collar, less maintenance in my very sandy soil but am concerned about them popping up because of the heavy duty spring.
Joey D on Apr 15, 2015
BEST ANSWER: Sorry. That question is over my head. I suggest u call Hunter. I found them to be very helpful even though I am not a big customer of theirs.
what part is this measured to know if I need a 4 or 6 inch sprinkler head? Above collar? or from top of threaded collar to bottom base? Help. Thanks
A shopper on Aug 18, 2012
BEST ANSWER: I have these heads in my system and the height is from the top of the threaded collar to the top of the head when it is in operation. In other words, it is the distance that the spray head pops up.
what is the difference between the different 4" SS rotors?
A shopper on Jul 15, 2018
I currently have 60 Hunter I 25 4 inch pop ups that need replaced. Will the I20 04 SS 4inch pop ups fit into the existing canisters? I'm doing this project myself and would like to avoid digging all of them out.
Marlin T on Jun 2, 2018
hunter I-20 tool available?
A shopper on May 24, 2017
what size is the inlet 3/4 or 1/2 inch ?
A shopper on Jun 6, 2016
Do you sell these Hunter I-20 stainless steel rotors in bulk?
Timothy A on Apr 16, 2016

We found other products you might like!

  1. on sale $21.88
    $38.00
    you save 42%
    Sku:I20-04-SS-R
    +