Order today, ship today!

Left for Same-Day Shipping

Free Shipping Offer to Orders over $149

Irritrol 700, Toro & Richdel Internal Manual Bleed Assembly | R606902

In stock
Free Shipping on Orders over $149
Sale Price $1.98
Our Price $2.78
You Save 29%

Irritrol R606902 Internal Manual Bleed Assembly for 700 Valves

The Irritrol R606902 is the Internal Manual Bleed Assembly for Irritrol 700 Series Valves.

Fits all 700 Series Valves below:

*The images above are to assist you in identifying which Irritrol valve you currently have and in turn help you in identifying the corresponding replacement parts. Valves are not included with the repair parts.

Valve Compatibility:
Irritrol 700, Richdel, Toro
Product Type:
Internal Manual Bleed Assembly
Valve Compatibility:
Irritrol 700|Toro|Richdel
Internal Manual Bleed Assembly
There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 8 questions Browse 8 questions and 37 answers
Why did you choose this?
SprinklerWarehouse.com Store
has the part
Karamat A on Nov 10, 2018
Needed to repair a a Irritrol 700-1 valve
J K on Aug 31, 2018
has the part
Karamat A on Nov 10, 2018
substitutes original part
E R on Nov 7, 2018
Needed to repair a a Irritrol 700-1 valve
J K on Aug 31, 2018
I'm replacing a damaged unit.
S D on Aug 2, 2018
We broke these trying to remove the solenoids
Denise M on Jul 31, 2018
We need to replace a broken one
E S on Jul 19, 2018
existing Irritrol Valve manual on/off handle broke.
T O on Jun 25, 2018
Makes it easy to turn the solenoid.
M R on Jun 6, 2018
Needed it to fix a broken unit
P O on Jun 4, 2018
broke part
M O on May 11, 2018
same as above
Joseph F on May 6, 2018
J M on Feb 20, 2018
to replace broken part
G R on Jan 30, 2018
Need replacements
P G on Jan 26, 2018
it fits my sprinkler valve.
Jennifer J on Nov 25, 2017
Because I broke the old one putting on a new solenoid.
Peter K on Nov 1, 2017
Only place that had what i needed.
L E on Oct 23, 2017
parts i need to repair my sprinkler system
E H on Aug 4, 2017
Replacement parts
D D on Jul 29, 2017
to repair my valve
R A on Jul 20, 2017
Appears to move past the stop
P G on Jul 3, 2017
substitutes original part
E R on Nov 7, 2018
I'm replacing a damaged unit.
S D on Aug 2, 2018
how do you make it work?
A shopper on May 13, 2012
BEST ANSWER: Basically it is a handle to help unscrew the solenoid 1/2 turn or so. That is how you manually turn the valve on and off. It goes on the bottom of the solenoid. Hope this helps.
is this for winterizing to drain the valve?
Frank L on Mar 30, 2013
BEST ANSWER: I Don't think so. We use this to manually opperate the sprinkler zone it feeds, Use it to bleed air out of the system in the spring. We turn the main h2o supply on then open those valves till we have h2o to the zone. Sumetimes opening and closing several times to clear any crud out of the valve. We do that to all the zones connected to the controll box that opperates those zone-valves. Once we know the valves have h2o and some sprinlkers pop up, we turn on the controll box and then run through all the zones (on manual from the box). then go from there ie: valves that dont turn on, guisers from broke heads, heaves in the ground( under ground leaks)
When we winterise, we used compressed air instead of h20 and go through all the zones from controll box : several times till all we get is air coming out the sprinklers. A 15min. pause between each round of air; to let the h2o srttle in the lines.
Is this for a 1" lawn genie?
mike t on Aug 19, 2014
BEST ANSWER: for a 1" rainbird vale with an Irritrol 6 volt latching solinoidEnter an answer to this question.
I have a irritrol 2711apr valve. The part where the solenoid screws into cracked. I just need the part that screws into the valve. Will this work?
pat h on Sep 24, 2013
BEST ANSWER: I looked at the Irritrol : 700-2-2 in. The manual on/off rotating lever appears to be the same, most all the solenoid assy. are the same from 1 in. valve to the largest valve so if you have an irritrol valve with the manual rotating lever for on/off or "Bleed". that will work for you. I know you can get the levers cause I have bought many spares. Your best bet is to get the whole solenoid assy., with the part that the lever turns and the lever(maybe a couple extras) and the solenoid. They are easy to wire up. 2 wires, just disconnect and connect one at a time, doesn't matter which one is which, same color and it's low voltage ( 24V-DC) so you wont get electrified, if you do it's no more than sticking your tongue on a 9V battery. Dave
Do you push this lever side to side or up and down or twist it like a key ?
A shopper on Jun 22, 2018
BEST ANSWER: On my system, it fits on the bottom of the solenoid, pushing it side to side rotates the solenoid thus opening or closing the valve.
how do you extract the manual bleeder control valve to replace it?
Mark J on Jan 13, 2017
BEST ANSWER: I accidentally broke mine off of the valve. It is supposed to unscrew from the solenoid
My anti siphon control valve is leaking from the diaphram. I've taken it apart, cleaned out any debris and securely tightened all 6 screws with no luck. Is there a replacment part available to fix this issue or do I need a completely new valve? It is an Irritrol 7000
A shopper on May 3, 2015