Dawn Industries Coring Tool 1/2 in. and 3/4 in. | HCT-COMBO

Dawn HCT-Combo Kwikseal 2-in-1 Saddle Tee Hole Coring Tool

Cuts a clean shaving-free hole in seconds and removes the plug from the pipe. Fits both 1/2" in. and 3/4" in. FPT outlets.

Directions

• 2-in-1 Hole Coring Tool
• Fits both 1/2" in. and 3/4" in. FPT Outlets
• With Blade retracted, insent coring tool into the female outlet.
• When the tool is well seated in the outlet, push hard straight down on the handle until you feel the blade penetrate through the pipe. With continuing down-pressure on the handle, turn the tool clockwise at least one full turn.
• Maintain the downward pressure on the handle and remove the tool from the fitting. Retract the blade by pulling the handle out to eject the core.