DIG 17 mm Brown Dripline (12 in. Emitter Spacing) (.95 GPH) (100 ft.) | A1-112P

• 100 feet
• 17mm Tubing (.570 ID x .670 OD)
• 12" Emitter Spacing (.95 GPH)
• Brown Drip Line
• Pressure Compensating

Features & Benefits

• Dual outlet configuration; if one outlet becomes blocked, a second outlet on the opposing side of each drip emitter along the line provides redundancy to the drip emitter performance
• Can be installed above or below grade
• Flow-regulated, self-flushing in-line drip emitters deliver equal flow at a wide range of operating pressures
• Two flow rates to provide maximum flexibility in a variety of applications
• Flow uniformity regardless of operating pressure and variation along the line
• Drip emitter and diaphragm are self-contained units that are molded into the interior wall of the tubing
• Turbulent flow through a large labyrinth water passage helps reduce clogging
• Emitters are made of three individual sections including a cylindrical plastic housing with a labyrinth water passage, a plastic receptacle and a floating silicon diaphragm
• Resistant to chemicals and fertilizers commonly used in landscaping
• Flexible tubing for easy installation
• Dripline is marked with flow rate, size and date for easy identification
• Use with DIG's 17 mm barb fittings, .670" OD compression fittings and universal Nut Lock fittings

Product Details

• Flow rate: 95 GPH (3.6 L/H) color code - white
• Operating pressure: 12-50 PSI (0.8-3.5 BAR)
• Color code: brown
• Materials: Low-density polyethylene resin
• Sizes: .570" ID x .670" OD (14.5 mm ID x 17 mm OD)
• Spacing: 12 inches (30 cm)
• Lengths: 100' coil (30 m)
• Minimum bending radius: 1" (.3 m)
• Filter requirement: minimum of 150 mesh

Related Articles & Videos

Articles

• Drip Irrigation Tubing Basics
• Drip Irrigation Benefits & How It Works

Videos

• Why Use Drip Irrigation?
• Drip System Zones
• Using Q-wrap