Order today, ship today!

Left for Same-Day Shipping

Free shipping over $125

DIG Adapter 3/4" FHT x MNPT | 16-003

In stock
SKU
16-003
Free Shipping on Orders over $125
Sale Price $0.86
Our Price $1.54
You Save 44%

DIG 16-003 3/4" in. FHT x MNPT Swivel Adapter

DIG's compression fittings are made of high-impact material to ensure a positive connection and a long life. Utilizing spin-weld technology, the ABS bodies are assembled with a polycarbonate insert that is welded into place.
  • Swivel Adapter 3/4" in. FHT x MNPT with washer
  • Hose or pipe thread male and female
  • Operating Pressure: up to 80PSI
DIG Swivel Adapter
  • Model, Description
  • 16-003, Swivel Adapter 3/4" in. FHT x MNPT with washer
  • Hose or pipe thread male and female
  • Operating Pressure: up to 80PSI
Brand:
DIG
Weight:
0.0500
Type:
Adapter
Combination:
YES
Material:
Plastic
Max PSI:
80 PSI
Connection:
FHT x MNPT
Size (in.):
3/4"
Drip Irrigation Size:
3/4"
Connection Type:
FHT x MNPT
Type:
Adapter
There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 4 questions Browse 4 questions and 6 answers
Why did you choose this?
SprinklerWarehouse.com Store
I need these to be able to make use of another product I already had
R U on Sep 5, 2017
I need these to be able to make use of another product I already had
R U on Sep 5, 2017
i forgot to order it on my previous order.
Chris M on Apr 12, 2017
i forgot to order it on my previous order.
Chris M on Apr 12, 2017
I brought 3/4 tubing . What is the size of the adaptor should I get ?so I can connect to the water hose
Courtney H on Aug 9, 2017
I am attempting to adapt a 3/4 riser with male thead to a 6 outlet 1/2 female thread manifold. Is this the right adapter?
A shopper on Jun 10, 2011
BEST ANSWER: No, this adapter has a female garden-hose end (very close to 3/4 MPT, but not the same pitch) and a male 3/4 pipe-thread end.

Your need is tricky, the threads aren't easy to fit within each other so the direction you need to go requires a reducing nipple, rather than a bushing. I don't think sprinklerwarehouse has a single part that will fit for you.

A quick route to a solution would be to use their (female) 3/4 pipe to 1/2 slip-fit PVC adapter, and then glue up a 1/2 PVC MPT end for it from parts from your local big-box store.

Sprinkler Warehouse part 435-074 "Dura 1/2 inch slip x 3/4 inch fpt PVC Female Adapter" will get you almost all the way there.
I'm trying to fit a hose end to 1/4 " distribution tubing. I have all the other fitings to reduce this to the 1/4" tubing but I need something to attach to the end of my hose. Will this match my hose threading?
Mike D on Mar 26, 2011
BEST ANSWER: Mike,
You're part way there. The hose bib side is correct - FHT can be read as female hose thread, so this will screw onto your hose bib. The other side however is a problem. I don't have enough information to know what is on the 1/4" tubing side, but this component has a MNPT which can be interpreted as a male pipe thread fitting. Probably not what you had in mind. There are a couple of important components that need to be in line between the hose bib and your 1/4" tubing. One is a pressure reducer to get down to a manageable 30 psi and the other is a filter element. My advice is to search through the hose to distribution tubing section for a kit which will include the mating parts that will get you down to .600" or similar standard tubing. Then get an adapter that goes from that size to 1/4". In the end, I think you will find the system works best with .600 to .700 distribution lines and then the 1/4" tubing branching off of it. Good luck!!