NewLite Q-Loc Landscape Lighting Medium Wire Connector (20 ct.) | NLQ-LOC

SKU

NLQ-LOC

Sales Price $18.78 Our Price $26.95 You save 30%

Overview

NewLite Q-Loc Landscape Lighting Medium Wire Connector

Pack of 20 per order
Type: Lid Wire Connector

Features & Benefits

NewLite's Q-Loc Lighting Connector was designed specifically to make your lighting jobs cleaner and easier to install. It's innovative locking bolt creates a quick connection, and allows for safe movement of the fixtures during final placement. Keeping in mind that every connection needs two connectors, Q-Loc designed their connectors to snao together allowing for a cleaning looking installation. The earth toned color and the grouping of the connectors allows the Q-Loc™ to be easily hidden in the landscape.

Product Details

The innovative locking bolt creates a quick connection while allowing for safe movement of the fixtures during final placement.
Patented distribution of silicone gel makes sure you have a water-tight seal every time.
Keeping in mind that every connection need two connectors; we designed our connectors to snap together allowing for a cleaner looking installation
IMPORTANT: Turn off all power before installing or removing any connectors. For use in damp, wet, rain-tight, and short term submersbible locations. Not to be used in continuous submission applications.
Wire Range: Min #20 / Max #10
Temperature Rating: 105 degrees C (221 degress F)
Sealant Temperature: -45 F to 400 F

STEP ONE Open Top Locking Bolt	STEP TWO Insert Striped Wires

Turn the top locking bolt counter clockwise until there is a clear pathway through the front opening of the connector. No need to fully remove.	Strip wires 3/4" - 1", Fan and Pre-Twist ends then insert intoi the connector as far as the wire will travel.
STEP THREE Hand Tighten Locking Bolt	STEP FOUR For A Clean Installation

No need to over tighten. The locking bolt will press against the wire jacket and not the bare cipper ends; giving it a better hold and secure connection	Press the male end of one connector into the female end of another connector. This will group your connectors together, and give a clean looking installation.