Blazing Products BS8000 1" Self-Tapping Saddle Tee w/ 3/4" FPT
The Blazing Saddle is the Original and best selling self-tapping saddle in the world. With millions installed in the ground every year and over 10 years of use, the Blazing Saddle is the most dependable saddle for your next irrigation installation. For use on 3/4 to 1" poly or PVC pipe with 1/2", 3/4" Female Pipe Threads or Swing Pipe Barb outlet.
Features & Benefits
No Clamping, Coring, or Cutting Required
The Blazing Saddle cuts out clamping, coring, and cutting. Less digging required for installation - you only need a hole 8" diameter to the pipe to install. Reduce the costs of labor, training, tools, glue and primer. There's no easier or more efficient way to tap pipe to install a sprinkler head. You can forget all the cumbersome aspects of insert fittings and get the job done faster.
Optimal Sprinkler Head Flow
The Blazing Saddle's unique design delivers optimal flow to each sprinkler head. The tap delivers more than 7 gallons per minute at 40 PSI and 12 GPM at 60 PSI. And there's no problem with flow restriction: On 1" polyethylene pipe, there is less head loss than with a standard insert fitting; on PVC pipe, the Blazing Saddle's contribution to head loss is equivalent to only 3' of plain pipe.
Blazing Saddles are made of high impact ABS and contain no metal or chloride like other fittings on the market making them the most eco-friendly fitting.
For use on any manufacturer's 3/4 to 1" 80#, 100#, or 160# Poly and class 160 or 200 PVC pipe.
Tested to pressures over 400 PSI and put through vigorous on/off cycling in excess of 250,000 cycles, Blazing Saddles will last longer than the life of the irrigation system.
Manuals and Literature
I'm not sure what the OD of 200 psi pipe is, and have only used it on 100 psi. If it is close to the same diameter, I would get one or two 2 try before ordering a bunch. They make installation much easier and faster. All you do is wrap the clamp around the pipe and push down on the top of the saddle until it clicks into place. Then screw the top piece in which also pierces the pipe. All that's left is screwing in the riser and the sprinkler head.
I hope this helps answer your question.
BS12500- 1/2 FPT Bag of 10
BS1250P- 1/2 FPT Bag of 25
Would this saddle Tee reduce the flow to my other valves due to it sticking in the 1" line? They claim the head loss is the same as inserting a regular T in a line.