How To Make A Simple Valve Activator

If you need to test a irrigation valve for functionality and do not have a valve tester, you can make one from three 9-volt batteries.

This will create a 27-volt valve activator that assembles quickly and is portable.

Steps In Creating A Portable Valve Activator.

  1. Take three 9-Volt Batteries
  2. Connect in a series
  3. Connnect one valve wire to the negative pole
  4. Then connect the other wire to the positive pole to activate the valve
  5. If the solenoid is functioning properly, you should hear a “click”

Note: Always Use Caution When Using Batteries. Be Careful Not To Damage Or Short Circuit The Battery – They May Leak Or Rupture.

Armada Technologies Pro-48 Solenoid Activator / Chatterer


Purchase the Pro-48 Solenoid Activator &Chatterer by Armada Tech

Recommended Posts