Trust Guard Security Scanned
hours left for
same day shipping
hours left for
same day shipping

⚠️ Shipping Times May Vary Based on Inclement Weather Conditions

Loading...

Weathermatic NITRO Inline Valve 1 in. FPT | N-100-H

SKU
N-100-H
Free Shipping on Orders over $149
Sales Price $23.71 Our Price $38.95 You save 39%

WEATHERMATIC NITRO SERIES IRRIGATION VALVES:

The NEW Weathermatic Nitro Series' Unique "reverse flow" design permits equal pressure distribution on both sides of the diaphragm, regardless of line pressure, providing zero stress to prevent "stretching," a common cause of valve failure. Weathermatic Nitro Series Valves have a reverse flow design for water conservation in the event of failure. Try the NEW Weathermatic Nitro Series Valves today!

WEATHERMATIC NITRO SERIES VALVE MODELS:
  • Weathermatic N-100-H
  • Weathermatic N-100SF-H
  • Weathermatic N-100F-H
  • Weathermatic N-100MB-H
  • Weathermatic N-100MBF-H
  • Weathermatic N-100S-H
WEATHERMATIC NITRO SERIES VALVE REPLACEMENT PARTS:
  • Weathermatic 110-603SAK - Replacement Diaphragm for 1" Nitro Series Valves
  • Weathermatic S20PSAK - 24VAC Replacement Solenoid
  • 100% water tested
  • 150 psi (10,3 bar) rating
  • Unique "reverse flow" design permits equal pressure distribution on both sides of the diaphragm, regardless of line pressure, providing zero stress to prevent "stretching," a common cause of valve failure
  • Reverse flow design for water conservation in the event of failure
  • Diaphragm's self cleaning ports constantly flex, inhibiting sand and silt from blocking valve action
  • Molded shock cone for smooth operation and reduction of water hammer
  • Easy-to-use internal manual bleed lever; bleeds valve downstream; has positive stops for open and closed positions
  • Marine-grade S20P solenoid with stainless steel actuator
  • Engineering grade PVC body and cover with combination hex, slot and Phillips retaining screws
  • Non-rising flow control stem throttles valve from full open to closed position on flow control models

Wiring requires a single lead from the controller to each solenoid, plus a common neutral to all solenoids; type UF wire, U.L. listed, is recommended for all hookups

24VAC/60Hz 24VAC/50Hz
  • Inrush: 9.48 VA
  • Inrush: 10.66 VA
  • Holding: 5.11 VA
  • Holding: 5.97 VA

Do not use nominal voltage ratings listed above for sizing of valve wires.

More Information
Brand Weathermatic
Body Material Enginnering Grade PVC
Flow Control No Flow Control
Valve Type In-Line
Connection FPT
Type Inline Valve
Application Residential
Solenoid Yes
Warranty 2 Years
Size 1 in.