Operate 2 Valves Independently with Only 1 Field Wire
The Wirevirus is a compact irrigation wiring solution designed to help operate two sprinkler valves independently using a single existing field wire. It can be used when adding a new zone, repairing damaged field wire, or avoiding the extra work of trenching and pulling new wire. When used within its specified limits (under 1 amp) and normal operating conditions, the Wirevirus is designed to provide long-lasting performance for many years of use.
Compatible with standard 24V irrigation controllers, the Wirevirus is waterproof, compact, and designed for outdoor irrigation use. Its color-coded wiring helps make installation easier in the field.
Common Applications
Add a new irrigation valve without running additional field wire
Repair damaged sprinkler valve wiring
Operate two valves independently from one available field wire
Reduce trenching and wire-pulling labor
Use when extra irrigation zones are needed but wiring is limited
Features & Benefits
Operates 2 valves independently using 1 field wire
Each set includes 1 controller-side unit and 1 field-side unit
Interchangeable units for flexible setup
Works with standard 24V irrigation controllers
Built to last, waterproof and durable construction for outdoor irrigation applications
Compact, pocket-sized design
Color-coded wires for easier installation
Uses 18-gauge copper wire
No batteries required
Helps reduce the need for additional wire nut connections
Save time and money, quick and easy setup
Made in Texas
Patent Pending
Why Choose Wirevirus?
Helps save time on irrigation wiring repairs
Useful for adding a zone without pulling new wire
Helps reduce digging, trenching, and landscape disruption
Small size makes it easy to carry in a service truck or tool bag
Simple solution for systems with limited available field wires
Compatibility
The Wirevirus is designed for use with standard 24V irrigation controllers. It can also be used with a master valve as long as the load does not exceed 1 amp.
Available Options
1-Pack SKU: BG-WV-1
5-Pack SKU: BG-WV-5
How to Add a New Irrigation Zone with Wirevirus
Locate the existing valve closest to the new valve installation to help simplify wiring.
At the valves, disconnect the working field wire from the existing valve.
Connect the working field wire to the green wire on the Wirevirus.
Choose either the red or blue Wirevirus wire for the existing valve connection. In this example, the red wire is connected to the existing valve.
Connect the remaining Wirevirus wire to the newly installed valve. In this example, the blue wire is connected to the new valve.
Connect the common wire to the new valve.
At the irrigation controller, disconnect the existing field wire from the original terminal and connect it to the green wire on the second Wirevirus unit using a wire nut.
Reconnect the Wirevirus wire used for the existing valve back to the original controller terminal. In this example, the red wire is reconnected to the original valve terminal.
Connect the remaining Wirevirus wire to the new valve terminal at the controller. In this example, the blue wire is connected to terminal 2.
How to Repair a Damaged Field Wire with Wirevirus
Identify the working field wire and the damaged field wire. In this example, the orange wire is working and the yellow wire is damaged.
Cut and abandon the damaged field wire.
At the valves, disconnect the working field wire from Valve 2.
Connect the working field wire to the green wire on the Wirevirus using a wire nut.
Connect Valve 2 to the red Wirevirus wire.
Connect Valve 1 to the blue Wirevirus wire.
Leave the common wire connected and verify it has a secure connection.
At the irrigation controller, remove and abandon the damaged field wire.
Disconnect the working field wire from the controller terminal.
Connect the working field wire to the green wire on the second Wirevirus unit using a wire nut.
Reconnect the red Wirevirus wire to the controller terminal for Valve 2.
Reconnect the blue Wirevirus wire to the controller terminal for Valve 1.
