PVC-Lock by Hydro-Rain is a remarkable push-fit fitting for repairing or installing PVC piped sprinkler systems without toxic glues or primers. Each PVC-Lock fitting contains a stainless steel retainer ring and an O-ring seal, preventing leaking at both low and high pressures. Perfect for the irrigation system’s main line, you can order several different sizes and shapes of PVC Lock fittings from Sprinkler Warehouse today.
Blu-Lock by Hyrdo-Rain is the fastest, greenest installation method available. Similar to PVC lock fittings, Blu-Lock’s push-and-go design uses no glue or clamps and cuts your installation time in half. Use Blu-Lock for all your piping after the valve. Click on the buttons below to watch more videos about Blu-Lock products.
PVC-Lock fittings provide a fast and reliable solution for most irrigation systems. Their push-to-connect design eliminates the need for primer and cement, significantly reducing installation time. They can create a secure, leak-resistant connection that holds up in both low and high-pressure systems. Installed fittings can swivel 360°, making sprinkler alignment and system adjustments simple. And, with the PVC-Lock release tool, they can be removed and reused. PVC Lock Fittings are compatible with Schedule 40, Schedule 80, and Class PVC pipes.
No tools are needed to install PVC-Lock fittings. Their push-to-connect design allows you to simply insert the beveled end of a PVC pipe into the fitting until it clicks into place. This tool-free process makes installation quick, clean, and chemical-free, eliminating the need for messy primer and cement. The only time you’ll need a tool is if you want to remove or adjust the fitting later, in which case a PVC-Lock release tool is used.
Yes, PVC-Lock fittings can be reused after removal, which is one of their biggest advantages over traditional glued PVC fittings. With a PVC-Lock release tool, the stainless-steel retainer ring can be compressed to release the pipe without damaging the fitting or the O-ring seal. This allows the fitting to be reinstalled in the same system or repurposed in another location. As long as the fitting and pipe ends remain in good condition, PVC-Locks can be used over and over again.
When installed correctly, PVC-Lock fittings are designed to be leak-proof. Each fitting contains a retainer ring that grips the pipe tightly and an O-ring seal that creates a watertight barrier around the connection. Together, these pieces prevent leaks, even in high-pressure systems. As long as the pipe ends are properly beveled and fully inserted, PVC-Lock fittings provide a strong connection that resists leaks just as well as traditional glued joints.
