The EZYVALVE4 Cleverly combines the efficiency of 4 inline solenoid valves into one full-scaled, unbelievably tiny valve box. The EZYVALVE4 works like a traditional valve box but for small gardens, or drip or spray irrigation systems. The EZYVALVE4 even works with 2 -3 Pop-ups on a small lawn. It works perfectly in courtyards and balconies too. It's also a fantastic addition to any veggie garden or raised garden.
The EZYVALVE4 is a pre-assembled solenoid valve box for controlling water in your irrigation system it can be connected to an existing garden tap and left above-ground for easy installation and access or it can be installed underground by hooking directly into an existing irrigation mainline using an isolation valve.
The simplest method of connecting to your water supply is to use a high-pressure braided hose. Simply screw one end of the hose onto the inlet thread of your easy valve 4 and screw the other end onto an existing tap in your garden The braided hose the tap acts as an isolation valve so if you need to service your easy valve 4 or if you want to move it to another location you can just turn off the tap.
The EZYVALVE4 Cleverly combines the efficiency of 4 inline solenoid valves into one full-scaled, unbelievably tiny valve box. The EZYVALVE4 works like a traditional valve box but for small gardens, or drip or spray irrigation systems. The EZYVALVE4 even works with 2 -3 Pop-ups on a small lawn. It works perfectly in courtyards and balconies too. ItââšÂ¬s also a fantastic addition to any veggie garden or raised garden.
EZYVALVE4 is a fully assembled 4 solenoid valve distribution system, self-contained in a compact water, dust, and pest resistant valve box. EZYVALVE4 is easy to install as part of a complete micro irrigation system.
Applications
Landscape areas, home gardens, greenhouses and nurseries for above or below ground installation.
The EZYVALVE4 is a preassembled solenoid valve box for controlling water in your irrigation system it can be connected to an existing garden tap and left above-ground for easy installation and access or it can be installed underground by hooking directly into an existing irrigation mainline using an isolation valve.
The simplest method of connecting to your water supply is to use a high-pressure braided hose. Simply screw one end of the hose onto the inlet thread of your easy valve 4 and screw the other end onto an existing tap in your garden The braided hose the tap acts as an isolation valve so if you need to service your easy valve 4 or if you want to move it to another location you can just turn off the tap.
| Brand | Antelco |
|---|---|
| Operating PSI | 3 - 180 PSI |
| Warranty | 1 Year |
| Size | 3/4 in. |
| Flow Rate | 0.25 - 8 GPM |
| Connection | MPT |
| Type | Drip Valve Box |
