Trust Guard Security Scanned
hours left for
same day shipping
hours left for
same day shipping

⚠️ Shipping Times May Vary Based on Inclement Weather Conditions

Loading...

Armada Tech Solenoid Activator/Chatterer | PRO-48

SKU
PRO-48
Free Shipping on Orders over $149
Sales Price $127.50 Our Price $182.95 You save 30%

Armada Technologies PRO-48 Solenoid Activator/Chatterer

  • Type: Solenoid Activator
  • Warranty: 1 Year 

Features & Benefits

Irrigation problems are often problems with the electrical portion of the sprinkler system. Sprinkler systems work on the idea that 110 volt AC is converted to 24 volt dc and sent down the wires leading to a solenoid attached to a valve at the appropriate time. If any of these electrical components fail, the system fails.

The Pro48 tests all of the critical electrical components and does so in an easy to follow LED system that walks a user through the process component by component.This system of checks tests out the clock or controller first, then the wires, and finally the solenoid, which are all of the electric components of a sprinkler system. So with a Pro48 tester, a user quickly determines which of these 3 parts is at fault.

The Pro48 Multi-Function Irrigation System Tester is a value-priced tester for irrigation contractors and maintenance personnel. This is important because no technology works if you can't afford it.

A powerful tool any technician can afford

Sprinkler solenoids can be checked using either activation or chatter modes. Lost or buried solenoids are quickly found as well by listening for the chatter or "chatterbox" function. Wiring can be verified and tagged with the built-in tone generator function. Clocks also are tested for proper 24vac output with a simple LED power check.

Made from a heavy duty plastic case, the highly visible yellow Pro48 sprinkler solenoid activator is designed for rugged use in the field.

Product Details

  • Power Requirements: Two 9V Alkaline batteries (not included)
  • Battery Life: 3 hours continous
  • Voltage Output: 36VDC peak
  • Voltage Protection" 28VAC
  • Activate Solenoids
  • Verify 24v Clock Output
  • Detect Short/Open Wires
  • Chatter Solenoids
  • Check Solenoid Condition
  • ID Wire with Tone/Probe

OPERATION

A. Battery Test

  1. Connect the red and black alligator clips together.
  2. Place the top switch to the SOLENOID ACTIVATE mode.
  3. If the batteries are good (at least 15 volts) the SHORT LED will turn on. If batteries are weak, the short light may only stay on briefly or not at all.

B. Clock Test

  1. Place the Pro48 in the OFF mode. Connect the red alligator clip to the station wire to be tested and the black alligator clip to the common wire.
  2. Turn on the clock station to be tested.
  3. If the proper voltage is detected, the CLOCK 24V AC LED will turn on.
More Information
Brand Armada Tech
Type Solenoid Activator
Warranty 10 Years
Brochure (424.60 kB)
Manual (366.17 kB)