• Waterproof and corrosion proof
• Pre-filled with petroleum grease that never hardens
• Easy latch lid provides strain relief
• Includes yellow nut for wire splicing
• Yellow nut is UL Listed and flame retardant
• Manufacturer approved for direct bury
• For use in irrigation systems and low voltage landscape lighting applications
• Wire range: #18-#10 AWG
• Perfect for low voltage lighting systems up to 50V

• Max. Voltage: 50V Max
  
• Connector Size: 2 23/32" x 1 1/2"
  
• Wire Type: Copper/Copper
  
• Wire Range: Min #18/Max #10
  
• Petroleum Sealant Temperature: -29°F to 250°F
• Measurements (Inches):
  • A - 2.71
  • B - 0.94
  • C - 1.50
  • D - 0.60

IMPORTANT: Turn off power before installing or removing connector. Product to be used in accordance with local and national codes.

1. Strip wire 3/8"(9.5mm). for #16 and smaller strip 7/16" (11.1mm).
2. Pre-twisting unnecessary. Hold stripped wires together with ends even.
3. Push wires into connector and screw on untl tight. Fig. 1
4. Insert the splice to the bottom of the sealant filled tube. Fig. 2
5. Position wires into wire channels. Fig. 3
6. Wipe any sealant around opening and conductors and close lid. Fig. 4

To be sold only with installation instructions.